I like mine, but they do tear the tops off of the bags

Thank all of you for your support. Thanks Bob Scott

+1 on bags being ripped. I bought mine several years ago at the Outdoor show in Arlington. He said he had never seen them used on a Tracker boat w/alum lids. I tried the adhesive pads but the rails kept coming off, so I screwed them to my lids, used pliers to break off the tips of the screws on the upper side of the lids. Relatively easy install, but works good, just need stronger bags for my plastics...thanks Bob.

I wouldn't be without the system it is just great.

The system works well, the only problems are ripped bags and bags falling off in rough water.

I like it to . I can't seem to keep the bags from tearing or falling off though..

I have a couple of tips on the bags tearing off. Push down on the clip button opening the jaw of the clip.Then with the jaw open slide the hanging hole of the bag (from the back side) threw the clip jaw and over the zipper. This will secure your bag and you can also hang your bag from the back flap only. This allows you to retrieve baits without removing the bag then zip the bag back close when the day is done. Again thank all of you for your support. Thanks Bob Scott

PM sent. Only bags I really have a problem with are the heavy Senkos tearing the bags. Easy install and very handy. Just another way for me to carry an extra 100 bags of worms.

Gambler bob, I didn't know you were "THE" Easy View guy! I've fished some of the JP tourney's with you. You have more baits hanging in your boat than Wal-Mart carries! Very cool system.

Added E-ZView standard storage system to my Ranger a few month back and here are the results...


1) The metal clips are already getting fatigued, bent slightly and some no longer can be used as they don't get any grip on the bags.

2) With the tackle system installed, the weight of the bags overpowers the Ranger Z-series rails spring loaded locker lid releases , and they no longer can pop-up the lid up high enough to open it easily with your fingers..

3) If you can manage to get the locker lid open with your fingers or a screw driver, the lid supports no longer work as the tackle weighs too much for them to hold and support the lid in a full open position.

The simpler HomeDepot steel Rod and everyday ID badges from Office Depot seems a better approach if you don't overload the lid supports. And if you have a Z series Ranger with rails, might avoid lid tackle storage altogether.