|
Forums59
Topics1,039,182
Posts13,960,486
Members144,192
| |
Most Online39,925
Dec 30th, 2023
|
|
 NEMA 2000 Configuration
#13883457
02/11/21 07:38 PM
|
Joined: Mar 2010
Posts: 25,824
T Bird
OP
TFF Guru
|
|
OP
TFF Guru
Joined: Mar 2010
Posts: 25,824 |
I plan to connect two Lowrance HDS 12 Gen 2 touch units (1 at console & 1 at bow) and a Lowrance Ghost trolling motor to a NEMA 2000 network. From what I can tell I will need to purchase the NEMA Starter Kit, plus 1 additional T Connector and 1 additional Drop Cable.
Does this sound correct to you all?
Okie by birth, Texan by choice. ![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2021/01/full-47849-80883-111.jpg) USAF "Thunderbirds" Alumni 1985-1989
|
|
|
Re: NEMA 2000 Configuration
[Re: T Bird]
#13883602
02/11/21 09:12 PM
|
Joined: Oct 2005
Posts: 979
Rob Jasper Lowrance Pro-Staff
Pro Angler
|
|
Pro Angler
Joined: Oct 2005
Posts: 979 |
You are correct. You can get the Lowrance Starter Kit for $69 plus the 'T' & Cable OR the Motor Guide NMEA Starter Kit for $89 that comes with the 'T' & Cable you need. Good chance that Bass Pro has them both.
Rob Jasper
|
|
|
Re: NEMA 2000 Configuration
[Re: T Bird]
#13883625
02/11/21 09:26 PM
|
Joined: Dec 2008
Posts: 16,181
grout-scout
TFF Guru
|
|
TFF Guru
Joined: Dec 2008
Posts: 16,181 |
You won’t gain anything hooking up gen2 T’s, they don’t network/control the ghost.
|
|
|
Re: NEMA 2000 Configuration
[Re: T Bird]
#13883627
02/11/21 09:26 PM
|
Joined: Feb 2015
Posts: 4,724
Flippin-Out
TFF Team Angler
|
|
TFF Team Angler
Joined: Feb 2015
Posts: 4,724 |
Be sure to power the NEMA network from a switched 12V source. You'll want to be able to turn it off when the boat is not in use.
|
|
|
Re: NEMA 2000 Configuration
[Re: T Bird]
#13884307
02/12/21 02:35 PM
|
Joined: Oct 2005
Posts: 979
Rob Jasper Lowrance Pro-Staff
Pro Angler
|
|
Pro Angler
Joined: Oct 2005
Posts: 979 |
Grout-scout is correct that the Gen2-Touch units will not hook up to the Ghost, however there are other benefits to running the NMEA network like when you put a waypoint on one unit, it places it on the other. Not only would I run the NMEA, but I would also run the Ethernet cable between the two units (since you are going to pull wires). As you upgrade your units later to newer HDS units, you will appreciate having the NMEA & Ethernet in place.
Rob Jasper
|
|
|
Re: NEMA 2000 Configuration
[Re: Rob Jasper Lowrance Pro-Staff]
#13884647
02/12/21 05:38 PM
|
Joined: Dec 2008
Posts: 16,181
grout-scout
TFF Guru
|
|
TFF Guru
Joined: Dec 2008
Posts: 16,181 |
Grout-scout is correct that the Gen2-Touch units will not hook up to the Ghost, however there are other benefits to running the NMEA network like when you put a waypoint on one unit, it places it on the other. Not only would I run the NMEA, but I would also run the Ethernet cable between the two units (since you are going to pull wires). As you upgrade your units later to newer HDS units, you will appreciate having the NMEA & Ethernet in place. Nmea is definitely beneficial if he adds a Point1, which is one of the best devices made for guys who fish off the bank. (You know that, that was more for the OP). I was hoping they were going to let the ghost tie into the point1, but apparently it just can’t be done, sure would make it easier.
|
|
|
Re: NEMA 2000 Configuration
[Re: T Bird]
#13884809
02/12/21 07:23 PM
|
Joined: Mar 2010
Posts: 25,824
T Bird
OP
TFF Guru
|
|
OP
TFF Guru
Joined: Mar 2010
Posts: 25,824 |
Appreciate the responses. Yep, Gen 2 touch and Ghost not compatible.
Why can't Lowrance keep unit soft ware compatible for relativity newer unit's?
Oh, my bad! $$$$$$$$$$
Okie by birth, Texan by choice. USAF "Thunderbirds" Alumni 1985-1989
|
|
|
