Is there any one in the Dallas area working on Lowrance HDS Gen 3 Units? Mine is out of warranty and Lowrance wants $1,125.00 for an exchange for what is probably a simple internal repair. I have done a hard reset>>>no help.

Try calling Boris Marine. Before Lowrance went to the current program, Boris was an authorized service center for Lowrance. They still do repairs on Lowrance out of warranty.

Thanks for the info...I will do without Sonar before I give the thieves at Lowrance $1,125.00 for an exchange for what has to be a simple internal fix. They need to start servicing what they sell or get the hell out of business as far as I am concerned.

Exactly

Yep. I have a HDS 9 Gen 2 paperweight in my shop due to a cracked screen.

A Gen3 is now 3 generations old. Even if Lowrance or anyone else would/could repair the repair cost might approach the exchange cost.

i suspect there is no simple fix - likely everything internal is mounted on a muliti-layer circuit board with surface-mount technology components, etc. Too time consuming and difficult to troubleshoot down to a component level. Would also require special equipment to repair and test not to mention maintain specialized parts stock. All that would probably require a circuit board swap out - essentially same as exchanging the unit. Thats probably what Lowrance does under warranty - just swap out defective boards for new tested ones or just send a new unit for replacement. Too time consuming and expensive to troubleshoot.

It ain't pretty but it is what it is.

These things are not our parents/grandparents color TVs.

They may help

http://www.clearcastmarine.com/
http://www.cionatech.com/

In the past Lowrance would sell parts to repair shops so people could make their own decision on whether to repair or replace. Most of the time it was much cheaper to repair. However, Lowrance decided to stop selling parts to repair shops so that you are forced to buy a new unit if its out of warranty. Bottom line: good for them, bad for the customer.

Just buy a 5 in. unit for sonar and mount it next to your big one.

Wish they would modularize the product. All they should sell is a smart box and ducers. Touch screens could be added separately and plug into the box.

Second on Boris Marine Electronics, Fort Worth. If it can be fixed they can do it.

BORIS MARINE !GOOD PEOPLE DOING A GREAT JOB!