I have 9 month old 24V 80lb. Model. Today while fishing, the motor began to make metal on metal screeching sound when running the motor. I sounds like it�s behind the prop in the motor housing. My question is do I remove the prop and investigate or doing this void my warranty? Looking for some advise and direction on how to proceed with this issue. Any comments and info. are greatly appreciated. Thanks

Take prop off and check for fishing line. Possibility

This 1st and if no line check to see if the noise is still present. If so then it is to the repair shop it goes. Did the prop hit anything before the motor started making the noise?

Removing the prop doesn�t void the warranty? Didn�t hit anything with the motor that I�m aware of. I�ll remove the prop and check for fishing line. Authorized repair centers in the DFW area?

Correct, removing the prod will not void warranty. See link below for ASP nearest you.


https://www.minnkotamotors.com/support/service-providers/locate

That link won't work for the Xi5. You need the Motorguide link.
http://www.motorguide.com/userfiles/docs/mg-dealer-list-91418.pdf

Removed the prop, no fishing line to be found. No visible damage to any part of the prop. I took a short video of the sound (noise) the TM makes when you hand turn the prop in both directions. Doesn�t sound good, I�ll be happy to send it to anyone if you provide a cell # I can send it to. Thanks and I appreciate all of the advise.