The nice thing about the PoleDucer is that you can adjust the handle size as you choose. The 3/8 All-Thread can be removed from the shaft collar and you can purchase via Lowes or Home Depot a piece that fits your desire length better.

I have had a PoleDucer for about 6 months now and it is an AWESOME product
Thanks David

Glad to hear you are enjoying the PoleDucer Stephen. It is the real deal...We have been busy installing the new Lowrance LiveSight on the PoleDucer as well. The PoleDucer accommodates most transducer and is the most versatile transducer mounting system on the market.

* Marine Grade Fiberglass shaft (no bending of the shaft if you bump a tree)
* Ram Mount Break-A-Way ability (keeps from breaking your transducer)
* All Transducer Cables slide up the center of the shaft (no need to manage the transducer cable)
* You can tilt the pole/transducer (for an unprecedented view like no other system)

Hello David at SHUT-UP-AND-FISH,

I'm interested in the PoleDucer for my Livescope transducer. I have sent you a PM with some questions I have.

Thanks,
Rodney

Thank you for your order. It was a pleasure assisting you.

We developed the 60" shaft out of fiberglass utilizing a marine-grade resin for strength and longevity. Lifetime warranty on the shaft. The inside diameter allows for the transducer cable to be run inside the shaft eliminating the need to have the transducer cable secured somehow (zipped tied) outside the shaft. This was part of the simple, clean appearance we were looking for. The fiberglass shaft along with the D-Size 2.25" RamMount allow for the "break-away" ability thus not causing damage to the shaft or transducer if striking an underwater object. The PoleDucer allows the angler total control of the transducer to be pointed at the intended target and not have their images skewed by the trolling motor turning left/right etc...That being said the PoleDucer is also a great option for any transducer and can be rotated in a 360-degree fashion to see all around your boat.

For those that have an electric-steer trolling motor like the xi3, xi5, Ulterra, Terrova or PowerDrive V2 The PoleDucer is simply another option to mount the transducer to instead of purchasing the cable guard system required from other companies to mount a transducer to those type trolling motors.

Mounting: The PoleDucer can be mounted to the Fortrex or Ultrex trolling motor side plate or to the gunnel of your boat.

The RamMount is 3.25 lb. (which is dead weight when attached to the boat) and the PoleDucer is 5.25 lb.

The Pole Ducer allows for the end-user to keep in touch with there target 100% as seen in this video.




over 500 sold this year...

You deploy it at the ramp and stow it at the ramp and simply lower it while fishing, and raise it while running to your next stop. Simple, Yet Effective...

Simply Awesome! Well done David!

At $1K for that transducer, I'm folding it back on the deck if I'm running across the lake.

It is an option but not required in most conditions.

This is an awesome design and application. If you tournament fish, it is a "must have" these days. Serious game changer. If you fun fish, it will drastically improve your fun and catch rate!
I attended the Crappie Expo in Hot Springs and David was covered up with people most of the day as he was demonstrating his PoleDucer. I don't think he and his wife were able to have lunch until after 2 o'clock. lol
When he says "Garmin approved", the engineer from the Garmin booth was bringing fisherman over to the Shut-up-and-fish booth to recommend and show them the PoleDucer. lol Now that's a serious recommendation.

I ordered mine Thursday evening and it was sitting in front of my door Friday afternoon. Took me a couple of hours and a bit of trial and error to install it, but that was due my inexperience and having to uninstall the setup that came with the boat. It mounted to the trolling motor and although it would move independent of the motor, it wasn't comfortable and I could not see which direction it pointed. Thanks to David and all the pointers he gave me. Now I just have to get out to the lake and break it in. I definitely recommend Shut Up and Fish. Couldn't ask for a better experience!

Yes, sir, Thanks, Tim. I believe there were 10 + boats on Lake Hamilton with the PoleDucer during the Crappie Classic Tournament. Yes we were very busy at our booth with the PoleDucer being a huge hit. Thanks for all of your help that day.



Thank you for your order. Enjoy the new toy!!

Our PoleDucer was recently mentioned in a Field & Stream article.
Section 3
https://www.fieldandstream.com/story/fishing/ultimate-guide-to-spider-rigging-for-crappies/


https://shut-up-and-fish.com/the-poleducer-1/