I bought a reman Ulterra for 1500 and change bought a 60 amp breaker 50 bucks bought a removable mount 80 bucks and had to buy a mount for my transducer cause they include us2 which means useless 2 me and you. Transducer mount 135. This is more public service than anything else. After you get past the bs the trolling motor is all it is told to be .I dont quite buy that the compass doesn't help spotlock and just does the jog. but I didnt test it both ways none the less it flashes every 3 seconds for something. Just a review. keep on fishing.

Got the tranducer stuff from corn field crappie gear really nice people and same machinist as precision .get me a discount nah just kidding but if you wanna by pass us2 (which stands for usless to 2 me and you ) check them out .

Sounds like you should have bought an XI5

With a LiftSaver!!!

You just hang in there buddy!!! It's gonna pay off you just wait and see!!( I hope)!!!..lol!!

Yes, Most definitely a LiftSaver ...... and not a clone because they are too hard to make!

And no where near as good as a real one!

OH, sorry, this is an Ulterra topic!

I'm partial to the original LiftSaver.




The LiftSaver also works with the MK Terrova, Ulterra, Power Drive V2 and Riptides.

You have a great product no doubt.But I live in the GP area and theives are many here. Reasoning for buying the other mount was quick on quick off.The motor weighs enough for an older guy, it almost makes you not want to go fishing.

I have this mount and it is very easy to use and take motor motel in the house or motel room. And i am a old man

Is it loosen 4 nuts and slide off or completely take nuts off and add back?

If you mount the liftsaver to the quick release you just flip a lever slid it off and go!

If you look at the picture I posted of my boat with the Xi5, you will see the 1/4" Nylon locking nut (4 - one on each corner) which you remove and can take half of the LiftSaver off with the trolling motor to be able to secure. Takes me less than a couple of minutes to take my motor off. Please understand that this is with the LiftSaver Plus (with the Quick Detach option). The LiftSaver Basic is designed to be permanently mounted to the bow (you can still remove the TM by removing the TM from the LiftSaver without going back under the bow in case you need to service the unit).

I've had a lot of guys tell me that the lever lock or slide units start getting a lot of play in them after a while and then they get real loose and rattle around. There is a testimonial on my website that addresses this exact issue. Check it out at www.liftsavertmmount.com

Here is the dolly I use to bring it in and out of the house..lol!!

I knew that was coming lmao .