Forums59
Topics1,058,939
Posts14,311,337
Members144,639
|
Most Online39,925 Dec 30th, 2023
|
|
Re: Anybody ever had this happen to their Minn Kota Fortrex?
[Re: big mike]
#12155120
03/23/17 09:26 PM
|
Joined: Nov 2010
Posts: 9,503
Jake Shannon(Skeet4Life)
TFF Celebrity
|
TFF Celebrity
Joined: Nov 2010
Posts: 9,503 |
I really like my Fortrex but that same bushing has broke 4 times on mine in two years. Im so tired of getting it fixed every six months. I dont know if its a design flaw or what but is a common problem on the Fortrex. I am going to contact Minn Kota and see what they will do about it. My warranty will run out soon and i shouldnt have to fix this every six months. There are 2 of these bushings and its always the one one on the outside edge closest to the water, that breaks. Design flaw I have replaced mine many many many times
|
|
Re: Anybody ever had this happen to their Minn Kota Fortrex?
[Re: NickHasty]
#12155241
03/23/17 11:02 PM
|
Joined: Jan 2007
Posts: 10,559
Jarrett Latta
TFF Guru
|
TFF Guru
Joined: Jan 2007
Posts: 10,559 |
The guy I know that repairs trolling motors says the majority of his business is Minn Kota. Basically, if it works for you, that's all that matters. We burn down 2 sets of batteries on MG routinely in the spring each day on Rayburn and Toledo. Stumps, grass, etc and have have zero issues with Tour model.
|
|
Re: Anybody ever had this happen to their Minn Kota Fortrex?
[Re: NickHasty]
#12156352
03/24/17 05:09 PM
|
Joined: Dec 2008
Posts: 2,685
redskeet100
Extreme Angler
|
Extreme Angler
Joined: Dec 2008
Posts: 2,685 |
I have a fortrex, what is this part called, where does it go? I want to make sure I am not sol because I don't have replacements.
|
|
Re: Anybody ever had this happen to their Minn Kota Fortrex?
[Re: Jarrett Latta]
#12156386
03/24/17 05:33 PM
|
Joined: Mar 2006
Posts: 11,340
reeltexan
TFF Guru
|
TFF Guru
Joined: Mar 2006
Posts: 11,340 |
The guy I know that repairs trolling motors says the majority of his business is Minn Kota. Basically, if it works for you, that's all that matters. We burn down 2 sets of batteries on MG routinely in the spring each day on Rayburn and Toledo. Stumps, grass, etc and have have zero issues with Tour model. this
"..The pleasantist angling is to see the fish Cut with her golden oars the silver stream, And greedily devour the treacherous bait. Bill Shakespeare
|
|
Re: Anybody ever had this happen to their Minn Kota Fortrex?
[Re: reeltexan]
#12156506
03/24/17 07:15 PM
|
Joined: Nov 2014
Posts: 27,642
SteezMacQueen
TFF Guru
|
TFF Guru
Joined: Nov 2014
Posts: 27,642 |
The guy I know that repairs trolling motors says the majority of his business is Minn Kota. Basically, if it works for you, that's all that matters. We burn down 2 sets of batteries on MG routinely in the spring each day on Rayburn and Toledo. Stumps, grass, etc and have have zero issues with Tour model. this Of course he repairs more Minn Kota stuff....it's what EVERYONE is using. Lol. That, and they are WORTH fixing.
Eat. Sleep. Fish.
|
|
Re: Anybody ever had this happen to their Minn Kota Fortrex?
[Re: NickHasty]
#12156509
03/24/17 07:17 PM
|
Joined: Oct 2007
Posts: 4,048
5Redman8
TFF Team Angler
|
TFF Team Angler
Joined: Oct 2007
Posts: 4,048 |
Do y'all realize Jake Shannon dredged this up from 2012???
|
|
Re: Anybody ever had this happen to their Minn Kota Fortrex?
[Re: NickHasty]
#12156518
03/24/17 07:25 PM
|
Joined: Jun 2012
Posts: 21,864
Douglas J
TFF Guru
|
TFF Guru
Joined: Jun 2012
Posts: 21,864 |
Hardest thing on that mount is rough water and trailering.
Invest $100 and get a T-H Marine Troll-Tamer, it will cut down on the stress on that pivot point while running the lake and trailering.
![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2024/11/full-72311-248284-f6b1190b_bbab_49d4_a1b2_6e9a1ce426f7.jpeg) #MFGA
|
|
Re: Anybody ever had this happen to their Minn Kota Fortrex?
[Re: NickHasty]
#12156807
03/24/17 10:56 PM
|
Joined: Nov 2008
Posts: 7,753
361V
TFF Celebrity
|
TFF Celebrity
Joined: Nov 2008
Posts: 7,753 |
Happened to me. When you see little pieces of that bushing laying around your boat it's hard to figure what they are.:-) Guy with little trolling motor shop on 515 @ Fork fixed me up pretty quick & cheap.
|
|
Re: Anybody ever had this happen to their Minn Kota Fortrex?
[Re: NickHasty]
#12157457
03/25/17 03:17 PM
|
Joined: Dec 2005
Posts: 1,346
tejasbass
Extreme Angler
|
Extreme Angler
Joined: Dec 2005
Posts: 1,346 |
I bought a Fortrex from a guy from Falcon. Guy said it was in excellent condition. Had a guy pick it up for me. Mounted the TM, pulled the rope and had a full 1 inch play in the bracket. One of the bushings was gone, the other was 1/2 gone. I love Fortrex, not MinnKota's fault I bought it sight unseen from a liar.
|
|
Re: Anybody ever had this happen to their Minn Kota Fortrex?
[Re: NickHasty]
#13472939
03/15/20 09:59 PM
|
Joined: Dec 2004
Posts: 5,057
joebass2
TFF Celebrity
|
TFF Celebrity
Joined: Dec 2004
Posts: 5,057 |
Does the entire rear pivot bracket(s) need to be replaced or just these bushings?
Thanks
|
|
Re: Anybody ever had this happen to their Minn Kota Fortrex?
[Re: Cajunsmitty]
#13473008
03/15/20 11:12 PM
|
Joined: Mar 2006
Posts: 2,868
basscaster46
Extreme Angler
|
Extreme Angler
Joined: Mar 2006
Posts: 2,868 |
I just don't get where you guys get that Minn Kota is the best thing since sliced bread?? First of all, I wanna know if y'all are comparing a fortrex to a MG Tour Edition 109? If so, then I don't see how you can even say they are comparable. My last boat had a 109 Tour Edition and my new one has the 101 Fortrex and I HATE it. First of all it sits damn near 2' off the front of the deck like a bridge truss. Quiet?? Yeah right, that thing makes a popping and squeaking sound everytime you turn. Powerful? Negative, that 109 Tour Edition will leave that fortrex in the wind. Don't believe me, GPS it!!! I live in south Louisiana, there is no harsher environment than these stump filled bayous and flats. Not to mention the almighty Red River and Toledo Bend. In 3 years with my Tour Edition I can count on one hand I jammed it so hard I had to crank up the outboard to get it to release. In 4 months with this Fortrex I've already done it 4 times. It hits a stump and pretty much just locks up. That MG would hit it, fold under and the strength of the shaft would pretty much bounce it off the stump. I don't see this thing taking the beating over the years like my MG did. I know everybody has an opinion so that's my take on the Fortrex. If we all liked the same thing the world would be a boring place.  I just don't get where you guys get that Minn Kota is the best thing since sliced bread?? First of all, I wanna know if y'all are comparing a fortrex to a MG Tour Edition 109? If so, then I don't see how you can even say they are comparable. My last boat had a 109 Tour Edition and my new one has the 101 Fortrex and I HATE it. First of all it sits damn near 2' off the front of the deck like a bridge truss. Quiet?? Yeah right, that thing makes a popping and squeaking sound everytime you turn. Powerful? Negative, that 109 Tour Edition will leave that fortrex in the wind. Don't believe me, GPS it!!! I live in south Louisiana, there is no harsher environment than these stump filled bayous and flats. Not to mention the almighty Red River and Toledo Bend. In 3 years with my Tour Edition I can count on one hand I jammed it so hard I had to crank up the outboard to get it to release. In 4 months with this Fortrex I've already done it 4 times. It hits a stump and pretty much just locks up. That MG would hit it, fold under and the strength of the shaft would pretty much bounce it off the stump. I don't see this thing taking the beating over the years like my MG did. I know everybody has an opinion so that's my take on the Fortrex. If we all liked the same thing the world would be a boring place.  I agree mount sucks . Think I’m going back to MG when the tour pro gets released. J D
I got all day I’m retired
|
|
Re: Anybody ever had this happen to their Minn Kota Fortrex?
[Re: NickHasty]
#13473218
03/16/20 01:33 AM
|
Joined: May 2012
Posts: 1,222
Bryanmc57
Extreme Angler
|
Extreme Angler
Joined: May 2012
Posts: 1,222 |
It takes about 30 minutes to change both pivot bushings. Definitely not an "end of the world" failure.
Honora Primum Vel Nullum Omnin Honorem
|
|
Re: Anybody ever had this happen to their Minn Kota Fortrex?
[Re: Bryanmc57]
#13473317
03/16/20 02:36 AM
|
Joined: Dec 2004
Posts: 5,057
joebass2
TFF Celebrity
|
TFF Celebrity
Joined: Dec 2004
Posts: 5,057 |
It takes about 30 minutes to change both pivot bushings. Definitely not an "end of the world" failure. Hey Bryan, does it just require replacing this whole kit or just the bushings in the kit? https://encrypted-tbn1.gstatic.com/shopping?q=tbn:ANd9GcREu7ln7QAMpYZAvhvc2Z-hk6Lgn1uDRgwd2lblywjHNE5IpUBdQMiCURELiAm7Ga2ezgIgbPQuP2bubyqLKR7Djzj_SslepIgrvC5And0PrALdCbBCQlL8EA&usqp=CAc
|
|
Re: Anybody ever had this happen to their Minn Kota Fortrex?
[Re: NickHasty]
#13473336
03/16/20 03:01 AM
|
Joined: Jan 2005
Posts: 1,910
heybaylor
Extreme Angler
|
Extreme Angler
Joined: Jan 2005
Posts: 1,910 |
I replaced mine once , they are a buck twenty-five apiece. fifteen minutes to replace
heybaylor
|
|
Re: Anybody ever had this happen to their Minn Kota Fortrex?
[Re: NickHasty]
#13473542
03/16/20 12:57 PM
|
Joined: Nov 2014
Posts: 27,642
SteezMacQueen
TFF Guru
|
TFF Guru
Joined: Nov 2014
Posts: 27,642 |
I’ve done this to my Ultrex twice...and found a chunck of bushing on the carpet again this past weekend. Time for set number three. It’s almost like an annual maintenance.
Eat. Sleep. Fish.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|