|
Forums59
Topics1,057,281
Posts14,282,127
Members144,606
| |
Most Online39,925
Dec 30th, 2023
|
|
 Trim Problem
#10014889
05/27/14 02:55 AM
|
Joined: Jul 2010
Posts: 117
Lee59
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Jul 2010
Posts: 117 |
I have an older Skeeter with a 200 Merc outbd, the problem is I can not get the power trim to go up or down using any switch I can hear the selinoid click when the switch is activated but nothing happends however I can use a jumper wire from the battery and can get it to go up and down any suggestions on what might be the issue. Thanks for any help anyone can provide
|
|
|
Re: Trim Problem
[Re: Lee59]
#10015170
05/27/14 11:30 AM
|
Joined: May 2003
Posts: 11,586
gary purdy
TFF Guru
|
|
TFF Guru
Joined: May 2003
Posts: 11,586 |
Make shure you have 12v to the big red wire connections of the trim solenoids. Is the red wire from the starter solenoid to the trim solenoids fused (3 ram trim). Is the trim a 3 ram or single ram? Single ram trim the pump and solenoid is in the battery compartment and has a + and - battery connection.
The world will not be destroyed by those who do evil, but by those who watch them without doing anything. Remember what He has done and remember that He is not done yet!-- GOD IS GOOD
|
|
|
Re: Trim Problem
[Re: Lee59]
#10017578
05/28/14 02:38 AM
|
Joined: Mar 2014
Posts: 11
matt morrison
Green Horn
|
|
Green Horn
Joined: Mar 2014
Posts: 11 |
Same exact thing happened to me its your relay switches but don't get the ones from autozone they don't work either get them from an actual marine store they're 22 dollars a piece and it'll have 5 prongs with a gel coating it takes 2 seconds to put them on
|
|
|
Re: Trim Problem
[Re: Lee59]
#10017581
05/28/14 02:39 AM
|
Joined: Mar 2014
Posts: 11
matt morrison
Green Horn
|
|
Green Horn
Joined: Mar 2014
Posts: 11 |
Same exact thing happened to me its your relay switches but don't get the ones from autozone they don't work either get them from an actual marine store they're 22 dollars a piece and it'll have 5 prongs with a gel coating it takes 2 seconds to put them on
|
|
|
Re: Trim Problem
[Re: Lee59]
#10017795
05/28/14 04:23 AM
|
Joined: Apr 2012
Posts: 175
cwoodfishing
Outdoorsman
|
|
Outdoorsman
Joined: Apr 2012
Posts: 175 |
There is a relay for up and a relay for down and if it wont go up or down both relays would have had to went out at the same time which is possible but if that is the case I would think there is a problem somewhere else causing it.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
