|
Forums59
Topics1,056,808
Posts14,275,015
Members144,596
| |
Most Online39,925
Dec 30th, 2023
|
|
 No trim and won't crank!
#9184856
08/01/13 01:56 AM
|
Joined: Feb 2009
Posts: 589
TXriggin09
OP
Pro Angler
|
|
OP
Pro Angler
Joined: Feb 2009
Posts: 589 |
Went to the lake trimmed up to take the transom saver off backed in and nothing. I have checked all the fuses I can find. All the lights work bilge works and the live well works but no trim and it will not crank. What could be the cause for this? Thanks in advance.
|
|
|
Re: No trim and won't crank!
[Re: TXriggin09]
#9185102
08/01/13 03:04 AM
|
Joined: Dec 2005
Posts: 4,392
ogles824 (aka Lakewaydr50)
TFF Team Angler
|
|
TFF Team Angler
Joined: Dec 2005
Posts: 4,392 |
First thing you need to do is take all the terminals off the battery post and clean everything there, post and all with a wire brush until it all shines like new money put it all back together and try it again. Let me know if that doesn't work.......and be sure to clean spades on both sides......If this fixes it coat both post and terminals with grease. This will stop oxidation......
2012 ZX200 Skeeter 2012 Yamaha 200 SHO Isaiah 40:31 "but those who hope in the Lord will renew their strength. They will soar on wings like eagles, they will run and not grow weary, they will walk and not be faint. Proud student of the Pro Staffer. https://www.youtube.com/watch?v=TzwF72B2F2w&t=14s
|
|
|
Re: No trim and won't crank!
[Re: TXriggin09]
#9185782
08/01/13 01:26 PM
|
Joined: Dec 2009
Posts: 1,482
RANGER SKI
Extreme Angler
|
|
Extreme Angler
Joined: Dec 2009
Posts: 1,482 |
is it an omc? check close to the starter solenoid for an in line fuse. usually a 20 amp
|
|
|
Re: No trim and won't crank!
[Re: RANGER SKI]
#9187239
08/01/13 08:26 PM
|
Joined: Sep 2008
Posts: 121,182
hopalong
Pescador Loco
|
|
Pescador Loco
Joined: Sep 2008
Posts: 121,182 |
is it an omc? check close to the starter solenoid for an in line fuse. usually a 20 amp this ^^^^^^^^^^^^ happened to me on the water, called for a tow. luckily one of our club guys found me and got me back to the ramp. had to call my mech on sat to find out I was missin the main fuse. it is a very short 20 amp glass fuse on older ones, blade fuse on newer and up towards top back port side.
" Hop, set the hook"!
hopalong 99,999
TexDawg 99,999
FJB! not my president by a long shot!
lake fork FISHERMANS COVE MARINA/reservations - 903 474 7479
|
|
|
Re: No trim and won't crank!
[Re: TXriggin09]
#9187986
08/02/13 12:23 AM
|
Joined: Mar 2010
Posts: 366
rainman64
Angler
|
|
Angler
Joined: Mar 2010
Posts: 366 |
If you have a Mercury outboard around the 50hp range pull the motor cowling and look on the right side towards the back and there is a fuse in a water tight housing and that is the culprit of your problems. This happens to me from time to time. I keep and extra 20 amp fuse in the boat.
|
|
|
Re: No trim and won't crank!
[Re: TXriggin09]
#9188580
08/02/13 04:00 AM
|
Joined: Feb 2009
Posts: 589
TXriggin09
OP
Pro Angler
|
|
OP
Pro Angler
Joined: Feb 2009
Posts: 589 |
I will check all of these tomorrow. Thanks for the replies I hope it works.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
