Anybody out there having problems with Scuppers leaking I installed new rubbers but when you stand at the back of the boat still get water in the boat Is there a good remedy for this with out Have to do tearout everything start over

http://www.overtons.com/modperl/product/...=SHOPPING_33467

these are the best style that i have found but dont let any fuel get on them it will eat them up

Thanks I've look at Those But I have brass scoffers with the rubber flaps and I'm trying to figure out How to retrofit those to fit I tried buying new flaps but within one year starts leaking again Any idea can these be screwed right on top of the brass fittings Or do you need to take them out and run the hoses out thanks

can you post pics of the ones you have

Not sure how to post pics i have them on my iPad but not sure how to post

Easy off iPad set up a photobucket, upload from iPad and copy direct link of each pic into the non floating image tab on full screen reply on your post

Okay I'm new with the iPad so what is a Photo bucket something you have to create online thanks

email them to me if you want nolte_martin@yahoo.com

email them to me if you want nolte_martin@yahoo.com

if you plan to upload picture here or lots of other sites you need a 'host' site for the pictures to live.. www.Photobucket.Com is a good one and after you get the hang.. its easy..

Here we go

yeah i wouldnt put those scuppers on there

So do I need to take these completely out and rework the hoses or try to bolt them to the face of the ones on there thanks

Or do I take a grinder and try to grind these things flat and install these on top of Them Try to Drill and tap them out Not sure how thick the material is thanks