I was at Ray Roberts Friday and can't get my contours on Hotmaps to show up on RR. Good one foot contours on Cedar Creek, but none on RR.Help, I know that someone out there knows wh.at bonehead mistake I have. Using 332c Lowrance.

I don't have the Navionics chip. You may have to select the lake under Map Data on the first Menu. Apparently you already know that since you are viewing Cedar Creek. However, if you are near any submerged timber you won't get contour lines on Navionics Premium.

http://www.texasfishingforum.com/.ubb/ultimatebb.php?ubb=get_topic;f=4;t=013679#000014

Just one of the advantages of Navionics HD.

You will have to open the individual files and load them one at a time until the lake you want appears. I also have the chip and it will load Lewisville automatically, but if I want Ray Roberts, I have to do it manually.

And then the part that is mapped on Roberts is only about a third of the lake. No Buck Creek area, isle de bois, wolf creek, ect.

Thanks,North Tex Marine, I discovered I have only one third, no Buck Creek, Isle Du Bois,etc, You wouldn't happen to know why, would you?

That data will surely be on the next 100+ dollar chip they try to sell...
From what I read.. it was due to the depth of the water, "in those creeks"

here's a little history on the subject

http://www.texasfishingforum.com/.ubb/ultimatebb.php?ubb=get_topic;f=21;t=001184#000000


tight lines

tha BassRustler