|
Forums59
Topics1,050,113
Posts14,152,162
Members144,434
| |
Most Online39,925
Dec 30th, 2023
|
|
 Re: Humminbird SONAR, How to Enter Coordinates
[Re: jsplinter]
#7645658
06/14/12 05:52 PM
|
Joined: Jul 2005
Posts: 545
Jiging Ken
Pro Angler
|
|
Pro Angler
Joined: Jul 2005
Posts: 545 |
Thanks I have called H/B this morning no luck .
Good Fishing and Be Safe
|
|
|
Re: Humminbird SONAR, How to Enter Coordinates
[Re: jsplinter]
#7651674
06/15/12 10:46 PM
|
Joined: Jun 2007
Posts: 4,834
DaveB
TFF Team Angler
|
|
TFF Team Angler
Joined: Jun 2007
Posts: 4,834 |
Went out this evening to do some fine tuning to my 788ci. Turned the unit on and the unit wouldn't load. The loading just kept flashing. Tried to power it down and it wouldn't let me. Had to disconnect it from power to turn it off. Tried to power it up several times and got the same results.
Keep on fishing.
|
|
|
Re: Humminbird SONAR, How to Enter Coordinates
[Re: jsplinter]
#7656923
06/17/12 02:55 PM
|
Joined: Sep 2006
Posts: 2,975
Doug Vahrenberg
Extreme Angler
|
|
Extreme Angler
Joined: Sep 2006
Posts: 2,975 |
Take all the maps cards or SD Cards out and test. IF not sounds like you need to call HB Customer Service 800-633-1468
 Website: www.dougvahrenberg.comSponsored by: Skeeter, Yamaha, MinnKota, Humminbird, LakeMaster, Transducer Shield & Saver, LuckyCraft, Dobyns Rods, Daiwa, Dave's Custom Baits, Omega Custom Tackle, Browning Eyewear, Elite Tungsten Co., Angler Innovations, Massey Ferguson.
|
|
|
Re: Humminbird SONAR, How to Enter Coordinates
[Re: jsplinter]
#7657600
06/17/12 06:43 PM
|
Joined: Jun 2007
Posts: 4,834
DaveB
TFF Team Angler
|
|
TFF Team Angler
Joined: Jun 2007
Posts: 4,834 |
I didn't have any SD or map cards in the unit when I powered it up. I installed it again Saturday morning and it worked fine until I got into the menu and selected the US2 option for the transducer. It then shutdown. Tried powering it up again and it flashed between the Loading and the Humminbird screen. Disconnected it from the power supply and let it set for awhile. Powered it up and it worked fine again. Glad I had my 383ci as a backup on the boat. Never have had an issue with that unit.
BTW! the Weathersense worked great on my 898. Thanks for the info you gave me previously.
Last edited by DaveB; 06/17/12 06:44 PM.
Keep on fishing.
|
|
|
Re: Humminbird SONAR, How to Enter Coordinates
[Re: Jiging Ken]
#7657831
06/17/12 07:57 PM
|
Joined: Jun 2006
Posts: 49,969
TreeBass
Lt. Dan
|
|
Lt. Dan
Joined: Jun 2006
Posts: 49,969 |
Thanks I have called H/B this morning no luck . They sent me a new power cable...its six feet long, and says its compatible with the 700, 900, and 1100 series  Guess I'll call em back in the morning
|
|
|
Re: Humminbird SONAR, How to Enter Coordinates
[Re: DaveB]
#7657839
06/17/12 07:58 PM
|
Joined: Jun 2006
Posts: 49,969
TreeBass
Lt. Dan
|
|
Lt. Dan
Joined: Jun 2006
Posts: 49,969 |
I didn't have any SD or map cards in the unit when I powered it up. I installed it again Saturday morning and it worked fine until I got into the menu and selected the US2 option for the transducer. It then shutdown. Tried powering it up again and it flashed between the Loading and the Humminbird screen. Disconnected it from the power supply and let it set for awhile. Powered it up and it worked fine again. Glad I had my 383ci as a backup on the boat. Never have had an issue with that unit.
BTW! the Weathersense worked great on my 898. Thanks for the info you gave me previously. so your good to go now?
|
|
|
Re: Humminbird SONAR, How to Enter Coordinates
[Re: TreeBass]
#7660156
06/18/12 02:00 PM
|
Joined: Apr 2011
Posts: 37
HBirdDeborahCrC
Outdoorsman
|
|
Outdoorsman
Joined: Apr 2011
Posts: 37 |
Thanks I have called H/B this morning no luck . They sent me a new power cable...its six feet long, and says its compatible with the 700, 900, and 1100 series Guess I'll call em back in the morning If you were sent the PC 11, power cord with a choke, it will also work on the 500 units. It was designed to assist with interference on the Side Imaging units.
~~Deborah~~
|
|
|
Re: Humminbird SONAR, How to Enter Coordinates
[Re: HBirdDeborahCrC]
#7660537
06/18/12 03:40 PM
|
Joined: Jun 2006
Posts: 49,969
TreeBass
Lt. Dan
|
|
Lt. Dan
Joined: Jun 2006
Posts: 49,969 |
Thanks I have called H/B this morning no luck . They sent me a new power cable...its six feet long, and says its compatible with the 700, 900, and 1100 series Guess I'll call em back in the morning If you were sent the PC 11, power cord with a choke, it will also work on the 500 units. It was designed to assist with interference on the Side Imaging units. THANK YOU!! I already tried to call this morning, but the line was busy. You just saved me some time. Thanks
|
|
|
Re: Humminbird SONAR, How to Enter Coordinates
[Re: jsplinter]
#7662361
06/18/12 10:41 PM
|
Joined: Jul 2005
Posts: 545
Jiging Ken
Pro Angler
|
|
Pro Angler
Joined: Jul 2005
Posts: 545 |
Interference update on my 597. Last week I received my new power cord from Hummingbird. After installing it there was no change. I have sent it back to Hummingbird for them to check it out. When it comes back I will install it and if no improvement I will go to the ground wire. Found this video might be the simple way. Will update later. http://www.youtube.com/watch?v=8p8NJ0LvNpo&feature=plcp
Last edited by Ranger-1; 06/18/12 11:13 PM. Reason: Web site change
Good Fishing and Be Safe
|
|
|
Re: Humminbird SONAR, How to Enter Coordinates
[Re: jsplinter]
#7664380
06/19/12 01:44 PM
|
Joined: Jan 2011
Posts: 1,613
Bassthumb: Phill's Guide Svc
Extreme Angler
|
|
Extreme Angler
Joined: Jan 2011
Posts: 1,613 |
I got one....
My 798ci is having issues when i crank the engine over? I am assuming this is a voltage issue and my battery may need to be replaced. The screen either goes completely white, or is has several colors of vertical lines. It basically freezes up until i take it off the base to disrupt power from it.
All power wires are soldered FYI.
Any advice?
|
|
|
Re: Humminbird SONAR, How to Enter Coordinates
[Re: jsplinter]
#7665299
06/19/12 05:07 PM
|
Joined: Sep 2006
Posts: 2,975
Doug Vahrenberg
Extreme Angler
|
|
Extreme Angler
Joined: Sep 2006
Posts: 2,975 |
Are they hooked direct to the battery? Sounds like low current to the unit is causing it to not operate properly.
Website: www.dougvahrenberg.comSponsored by: Skeeter, Yamaha, MinnKota, Humminbird, LakeMaster, Transducer Shield & Saver, LuckyCraft, Dobyns Rods, Daiwa, Dave's Custom Baits, Omega Custom Tackle, Browning Eyewear, Elite Tungsten Co., Angler Innovations, Massey Ferguson.
|
|
|
Re: Humminbird SONAR, How to Enter Coordinates
[Re: jsplinter]
#7666103
06/19/12 07:45 PM
|
Joined: Jan 2011
Posts: 1,613
Bassthumb: Phill's Guide Svc
Extreme Angler
|
|
Extreme Angler
Joined: Jan 2011
Posts: 1,613 |
they are wired to a heavy gauge wire in my console. I could try to run a new direct wire and see where I get. thanks
|
|
|
Re: Humminbird SONAR, How to Enter Coordinates
[Re: jsplinter]
#7666130
06/19/12 07:50 PM
|
Joined: Sep 2006
Posts: 2,975
Doug Vahrenberg
Extreme Angler
|
|
Extreme Angler
Joined: Sep 2006
Posts: 2,975 |
Hook direct to the battery that is recommend with a 3 Amp Blade Style Fuse. IF your boat wiring is not heavy enough gauge it can restrict current flow.
Website: www.dougvahrenberg.comSponsored by: Skeeter, Yamaha, MinnKota, Humminbird, LakeMaster, Transducer Shield & Saver, LuckyCraft, Dobyns Rods, Daiwa, Dave's Custom Baits, Omega Custom Tackle, Browning Eyewear, Elite Tungsten Co., Angler Innovations, Massey Ferguson.
|
|
|
Re: Humminbird SONAR
[Re: jsplinter]
#7668466
06/20/12 03:58 AM
|
Joined: Mar 2012
Posts: 1,154
NODOUBLEDIGITYET
Extreme Angler
|
|
Extreme Angler
Joined: Mar 2012
Posts: 1,154 |
having a problem with a 997c si ,I purchased a pre-owned unit from a member here and a new transducer from another installed the unit ,went out on the water and the si worked fine for about 3 min then the right side went black ,I don't have anything in the way of the transducer , all settings are correct , when I put it in simulation mode both left and right work fine ,,,,,so is the problem the transducer?
|
|
|
Re: Humminbird SONAR
[Re: jsplinter]
#7671031
06/20/12 08:40 PM
|
Joined: Sep 2006
Posts: 2,975
Doug Vahrenberg
Extreme Angler
|
|
Extreme Angler
Joined: Sep 2006
Posts: 2,975 |
IT could be either in the transducer or headunit. Simulator is just computer program running in the unit with sonar data.
I would recommend cross testing on another SI Transducer. ANd test their headunit on your transducer. This will tell which is the source of the concern.
Website: www.dougvahrenberg.comSponsored by: Skeeter, Yamaha, MinnKota, Humminbird, LakeMaster, Transducer Shield & Saver, LuckyCraft, Dobyns Rods, Daiwa, Dave's Custom Baits, Omega Custom Tackle, Browning Eyewear, Elite Tungsten Co., Angler Innovations, Massey Ferguson.
|
|
|
![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2022/03/full-18300-133021-boat_sig_2022.png)
![[Linked Image]](http://i.imgur.com/xPKie0ft.jpg)
