Map Card Problem

Main Menu

Affiliates

Newest Members

Top Posters(All Time)

TexDawg 124,539

hopalong 121,182

Forum Statistics

Forums59

Topics1,057,038

Posts14,278,897

Members144,601

Most Online39,925
Dec 30th, 2023

Print Thread

Map Card Problem #7561140 05/23/12 03:48 AM
Joined: Feb 2009 Posts: 132 North TX M MHB07 OP Outdoorsman
OP MHB07 Outdoorsman M Joined: Feb 2009 Posts: 132 North TX	Had problems with my navionics card today while at fork. Only showed lake. No details such as depth and all contours. Anyone know what's up?? Have never had this happen.

Moritz Chevrolet - 9101 Camp Bowie W Blvd, Fort Worth, TX - Monte Coon (817) 696-2003

Re: Map Card Problem [Re: MHB07] #7561193 05/23/12 04:11 AM
Joined: Oct 2009 Posts: 521 Brashear TX Kevin Sharp Pro Angler
Kevin Sharp Pro Angler Joined: Oct 2009 Posts: 521 Brashear TX	Did you pull the card and put it back in? Maybe it would reset things. Also make sure, if is a smaller unit, to change the map area to east texas. I was on tawakoni once and had the same thing happen. Turns out tawakoni is in the north texas region.

Re: Map Card Problem [Re: MHB07] #7562719 05/23/12 04:20 PM
Joined: Jun 2009 Posts: 116 Texas Navguy Outdoorsman
Navguy Outdoorsman Joined: Jun 2009 Posts: 116 Texas	What unit are you running as well as what Navionics chart are you using?

Re: Map Card Problem [Re: MHB07] #7562767 05/23/12 04:28 PM
Joined: Apr 2006 Posts: 16,679 Lake Fork, Texas Lake Fork Guide TFF Guru
Lake Fork Guide TFF Guru Joined: Apr 2006 Posts: 16,679 Lake Fork, Texas	Funny you say that, my front HDS10 did the same thing last night in the working man tourney. It will run the insight/Lowrance but not the nav chip. I pulled the chip from my rear HDS thay was pulled up and working fine and installed it on the bow and it didnt work either. I re installed it in the rear and both chips worked on it.

Re: Map Card Problem [Re: MHB07] #7562837 05/23/12 04:43 PM
Joined: Feb 2009 Posts: 132 North TX M MHB07 OP Outdoorsman
OP MHB07 Outdoorsman M Joined: Feb 2009 Posts: 132 North TX	Maybe it was something in the air at fork Cody lol., it's an eagle 642i unit, and yes I tried to pull it out and out back in but still wouldn't work right.. Going back Friday guess I'll try again.

Hop To