Worked like a champ. Thanks Doug. Got the new Humminbird 788ci Combo today. Mounted up easily since everything matches from my 383c. Powered up with no problem. Did change the mount out just because it is new. Worked like a champ. Got to field test it tomorrow on the lake. (Note to self, get a new sd card to record the everything I fish.)

I'm sure its covered in here somewhere, I'm too lazy to go back though all the posts, but what size SD card can I use with the 898c?

thanks

OK, here's the deal. Got on the lake with the new 788. Pressed the mark button to mark my 1st waypoint without any issues. Went to mark the second one and the unit shut down. Tried it 4 different times. It shutdown all 4 times. What's up with that?

Try Restoring Defaults. That may resolve your concern

Well Humminbird's Bill Carson went out again armed with Humminbird 360 Imaging and Snorkel Equipment and his GoPro Camera....Here you Go...

Humminbird 360 Imaging Finds the Bream Beds in Front of the Boat...



Zoom of the Beds...now look Close...



Time to Dive in the Water...What do we see???

Humminbird 360 Deployed below the boat to look forward...



And Now the Good Stuff...The Bream Beds and everything in the image from a humans eyes...

Here's the log and a Bed





Now the Bream and the Beds...







Humminbird 360 Imaging showing what's in front of you just like it is under the water...your forward looking under water eyes...no more need to fish in the past!

wow, thats incredible

I am a step behind most of you but am catching up. I just I stalled my 597 DI combo today. I am stoked to be able to have this on my boat. My question is how to save an image to it if I have a navionics map card in? Or can I? Do I have to have an SD card with me and pull the navionics out to save an image?

That worked. Thanks!

Yes, Since the 597 DI only has one card reader you need to remove the map card and insert a blank card to save screen captures.

LakeMaster Chart with Links to all Versions of LakeMaster Products Current and Non-Current Versions:

http://www.lakemap.com/lakemasterhumminbirdcardinformation.aspx

Now how about a Stump under water...



Here is what SI shows but it's behind the boat...or historical data...



Now here is 360 Imaging and showing you the same stump...



Here's some more images of the same stump and a few others in the same area

Humminbird Warranty Statement

Question on where to start. HB 596 on the MK terrova is catching interference. It's vertical lines when the TM is operating, and the depth starts bouncing out some really deep numbers. TM off, everything is ok

Help please

First I must say that Humminbird service is great. I sent my unit off last Thursday and got it back today. I sent it off because DI and SI worked great in shallow water but would begin to fade as I moved into deeper water and was completely unusable in 25+ feet. HB said that they checked the unit out and found nothing wrong with the unit. They shipped it back and included a brand new HD transducer stating that if the unit was good then they suspected the transducer was probably at fault. I will put the transducer on tomorrow and give it a shot this weekend looking for some fat sandies. Just thought someone else may have had this problem and this post might help. If I had not sent it in to HB, I would not been able to figure out which was bad and certainly would not have gotten a new transducer so quick.
CrappiePoppie (Gary)

Probably out of my league here but I am going to guess that the trolling motor is analog instead of digital and that is causing the interference

Hope this helps