What is the best way to peg bullets weights? I am wanting to climb through weeds, trees and bushes. Thanks

bobber stoppers

Try these

http://www.tacklewarehouse.com/Top_Brass_Peg-It_Pegging_System/descpage-TBPI.html

Or break off a tooth pick in there like I do.

I find the pegs posted above difficult to get out of a light weight.

I prefer to peg weights with something similar to these:

http://www.tacklewarehouse.com/6th_Sense_Peg_X_Stoppers/descpage-6SPEG.html

^^^^^^Those are the ones I use.

bobber stops. period. end of discussion.

The sixth sense pegs are the best

The sixth sense pegs are the best

These right here...

Danielson Rubber Bobber Stops 10pk
www.tacklewarehouse.com/...Bobber_Stops.../descpage-DANBOBR....
The Danielson Rubber Bobber Stops are ideal for punch rigs, slip floats and adjustable sinker rigs. Easy-to-use, simply run the line through the wire loop and ...

You can use a Rubber Band in a pinch too.

I use bobber stops

I know I shouldnt do it, but I still use a sliver of a toothpick. I just make sure not to pinch my line.

They will slip on wet line if you are casting. I put two of them on there to prevent it.

sorry for the broken link, above. google danielsen bobber stops. look for the round, yellow tab with wires coming out of it. There will be red, yellow and black footballs toward the end of those wires. Those are your "bobber stops" and they go on your line before your weight, for the few who were unaware. Cheapest and best system for pegging I've found. There are lots of "improvements" to the original, and they all work too.

In this case however, the original is still the best!