texasfishingforum.com logo
Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
tieyi, Chad Jordan, TCKrugerville, Monkey95, HudBass09
119639 Registered Users
Top Posters(All Time)
TexDawg 125,000
hopalong 121,182
Bigbob_FTW 105,146
Bob Davis 97,323
John175☮ 86,143
Pilothawk 83,932
Mark Perry 74,875
Derek 🐝 68,511
JDavis7873 67,416
Forum Statistics
Forums59
Topics1,058,788
Posts14,308,631
Members144,639
Most Online39,925
Dec 30th, 2023
Print Thread
Need advice #714787 09/11/05 04:33 PM
Joined: Aug 2004
Posts: 200
1
1Troutman Offline OP
Outdoorsman
OP Offline
Outdoorsman
1
Joined: Aug 2004
Posts: 200
I have a 15 hp motor that hasn't been started in only two months. I took it out this morning and three pulls it starts. I leave the choke on for awhile so it can warm up, and when it did, I pushed the choke in and it died in 10 seconds. So I repeat this process over and over again until I was confident that it was warmed up a bit. (the water coming out was hot) When it started I pushed the choke in, and once again it died. Does it sound like I need a carbeurator cleaning, or does it sound like I have way too much water in my gas? Thanks

Re: Need advice #714788 09/13/05 01:13 AM
Joined: Oct 2004
Posts: 1,258
B
Bullet Driver Offline
Extreme Angler
Offline
Extreme Angler
B
Joined: Oct 2004
Posts: 1,258
sounds like you might have a fuel prob there, opti might have some other ideas about it.




"When all else fails, use a Grenade!"
Re: Need advice #714789 09/13/05 02:43 AM
Joined: Jun 2004
Posts: 1,509
O
OPTI Offline
Extreme Angler
Offline
Extreme Angler
O
Joined: Jun 2004
Posts: 1,509
1Troutman..... Sound like your idle circuit is stopped up needs a carb job....OPTI

Re: Need advice #714790 09/13/05 04:58 AM
Joined: Aug 2004
Posts: 200
1
1Troutman Offline OP
Outdoorsman
OP Offline
Outdoorsman
1
Joined: Aug 2004
Posts: 200
Ok, so I should rule out the bad gas then? Thanks

Re: Need advice #714791 09/17/05 04:06 PM
Joined: Aug 2004
Posts: 200
1
1Troutman Offline OP
Outdoorsman
OP Offline
Outdoorsman
1
Joined: Aug 2004
Posts: 200
Ok, I did as instructed to, and all worked well for a bit.. Now while it's running I can hear and see sparks shooting out lightly from one of my spark plug boots. They're brand new wires..
Looks like it's coming out where the boot meets the plug. As soon as it starts to spark, then it dies. Any ideas? Thanks

Previous Thread
Index
Next Thread

© 1998-2022 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide
Powered by UBB.threads™ PHP Forum Software 7.7.3