I finally got the nerve up to cut a hole in my TR20!! The Protray is sweeeet!!! It suppose to help lower back pain and better control....Can't wait to use it!! Only took 2 hours to install and that was with 2 trips to Lowe's for some fittings....

Looks good- been thinking about this, what fittings did you need..

The ProTray kit came with the tray, stainless screws, drain hose, and template to cut around...The drain hose that was included was too big. You splice into your butt seat drain...but my drain hose was smaller so I had to get a 1/4" tee and some hose...only cost $2.00 and it worked great!! VERY straight forward install...The ProTray is only $73. plus shipping... ALOT cheaper than the other ones that I could find!! Call Mark at 417-862-6512 or email him at mrmiller@polyfabplastics.com He is very helpful and answered all my questions quickly!!

I've been comtemplating that same thing! You did a good job of putting her in there! Are you planning on coming back down to Texas this spring?

Hey Bob,

Yes sir....we are leaving Feb. 24th to come down to Fork....so save some 10 lbers for us!!

Rick

Looks good... I know it had to take nerve to make that first cut...

thx....hahaa! Yes, it did!! Once I drilled the pilot holes, I knew there was no turning back!!!!

Is the pro-tray plastic or aluminum?

I'am about to do this to my boat, and another buddies boat.

BTW, that looks Sweeeet !!!!!!!!

Good job there, I would be scared to death to start cutting on a boat!

Rick, if you don't have my cell phone number, email me and I'll give it to ya. I'm sorry our schedules conflicted last year, but this year I would love to meet you out there for a day or two!

Hey Bob...u got mail!!! Redranger, it's a hard plastic that they say that motorcycle helmets are made of!! strong stuff!! Ya, it was kinda of sceery, but I just made sure my measures were right and it all came together!!!!

Rick

nice job

thx, Bullet....I sat there on the butt seat and standing and I can tell it's going to feel alot better especially in rough waters!!!!

Rick

I have cut a few holes in Boat, It don't bother me no more.

Me and a few of my fishing buddies are about to install those in our boats.

I was leaning toward aluminum one, but now I hear that they will come apart at the seams after a while due to the boat flexing.

I think I will be leaning toward the type you installed.

Good Post.

Ya, I did a loc-r-bar a few weeks ago...so I too may gettin ok with the hole cuttin thing!! That's a good point on the flexing....never thought of it! I ordered 2 when I bought mine, one for me and one for my father in law who also has a TR20....saved on shipping too! For $73. it's alot cheaper than any others....and the customer service is sweeeet as well...I emailed Mark several times before I bought them and he answered all the questions...and took care of my concerns!!!

Rick