Thats what I needed to know, thanks Wayne..

I transom mount my transducer for a 788ci HD DI Combo on a 96 Ranger 461 VS. I mounted the transducer in the area above the drain plug and intakes for the live wells per Hummingbird website. Good returns at low speed but it looses bottom when on plane. What are my choices for all speed returns?

In case none of you know, the DI transducers can be used as a shoot-thru. You won't get water temp with the built-in temp sensor, but you can add the accessory TG-W temp sensor for that.
The XIH 9 DI T comes with the epoxy instead of the transom mount


There is a new shoot-thru version I heard about that has the remote temp sensor. Haven't seen it on the HB web site yet.

Has anyone dealt with the Hummingbird Factory Outlet recently? I am wanting to order the 998c SI combo but am a little nervous.
Took me 4 months to save up the money for this unit.

thanks

No haven't used them, but i did by 2 from Universalmania they were on sale.Fast shipping very smooth transaction.

Get a hold of David at Shut up and fish on this forum. http://texasfishingforum.com/forums/ubbthreads.php/topics/5767861/1/FOR_SALE_Humminbird_798_898_99
Good guy you can trust!

i bought from them my 798c a few weeks back. no problems... actually they were far beyond helpful to me.

Humminbird Factory Outlet is the name of an online store...It has no association to Humminbird, except they sell Humminbird products.

I bought a 798 ci SI last year and need to get a unit for the front of the boat. I'd like to link the units so they can share waypoints. A couple questions:

1. Will a 587 work? If not, what are my somewhat economic options that will allow me to still have a reasonably large screen?

2. What else am I going to need to buy, and how hard will it be to set up?

Thanks.

Only the 700,800,900 and 1100 Series have networking capabilities. With the 798ci InterLink will be your choice for networking.

The most economical models will be the 700 series Units and all you will need is the InterLink Accessory.

Thanks Doug. Then a 787c2 would work, correct?

Your videos are great by the way. Transforming the way my son and I fish.

You can InterLink the 798c with 787c2

NEW For 2012 From Humminbird:

* Radar
* Ethernet Networking via Hub of Multiple Units (more than 2 units) and future Ethernet Accessories
* NEMA 2000 Connection to Ethernet Network
* Expanded Down Imaging Units with 2D in the 300,800, 900, 1100 Series

More Information to come as released and photos...

HumminbirdTV YouTube Clip:
http://youtu.be/PhHfU-QpdEM

New 300 Series Down Imaging



1158c DI - 2011 ICAST Best of Show Winner - Electronics

HUMMINBIRD WAYPOINT MANAGEMENT SOFTWARE

Humminbird is starting to release the software for Waypoint Management. The 998c Software V5.70 has been released and more models are coming as they release the software. Keep a watch on your accounts for the updates.

Waypoint Management is under the Navigation Tab then Scroll Down to Waypoints, Tracks and Routes and open it...

This is Sample Image:

It is showing up for my 958c but it is saying not found when I try to download it. I noticed in the top left corner it says 0 bytes. What do I need to do.