Oh wise ones....I have a 2003 Ranger 521 with the digital keypad. I'd like to use 1 of the 3 ACC buttons/switches on the console for the LSS-1's (yellow wire) and connect the positive and negitive wires under the console also. I'd appreciate if someone could explain how and especially where and what color wires I need to look for. Spent an hour under the console last night and left feeling like I just had my 1st "Senior Moment." Thanks....

Rgr22, I have a 2007 Z21, If this helps look under the compartment lids,port side rear is a wiring diagram on mine,
your compartment configuration may be different. I would think that it will be somewhere near the rear of the boat.

Rgr22 I received my LSS-1 Structure Scan yesterday. So I will be looking on how to hook all that up myself. I have not looked into the power /accessory switches in the console, so you are ahead of me. Good Luck and maybe we figured this one out together. I am bumping your post in hopes someone will help us out with some information. I hope to get started on mine this weekend. Good Luck!

pm sent

I got the wiring for you to put the yellow wire on A1. Cut the blue and orange wire. Add the yellow wire to the orange and blue re-crimp that you do. There you go

nice and easy

Thanks guys. So far I haven't found the orange/blue wire under the console??? I guess I'll take my glasses with me next time.

Got mine installed up, running and wow, you got to like that DownScan!!!

Finally found them. They were cable tied to other wires in the starboard side hole that all the wires come to the console from. They weren't connected to anything, just snipped off. I connected the yellow to the orange/blue and it worked.

Thanks again.