Forums59
Topics1,057,411
Posts14,283,944
Members144,608
|
Most Online39,925 Dec 30th, 2023
|
|
Motor has a hard time on the first start!
#4681342
03/31/10 11:36 PM
|
Joined: Dec 2009
Posts: 40
blackbass87
OP
Outdoorsman
|
OP
Outdoorsman
Joined: Dec 2009
Posts: 40 |
I have a 95' Evinrude 130hp and it ran fine last year and i started it through out the winter and it started right up. But you know how it goes when its time to fish it take a long time to start up, i have used starting fluid but i dont like to and this problem is olny on the first start up of the day when the motor is warm it runs great. Help!!
|
|
Re: Motor has a hard time on the first start!
[Re: blackbass87]
#4681773
04/01/10 01:23 AM
|
Joined: Feb 2006
Posts: 48,345
OldFrog
TFF Guru
|
TFF Guru
Joined: Feb 2006
Posts: 48,345 |
They are normally cold natured...but not that bad. My old rude just needs a bulb pump or 3, start lever up and choking. It takes a min. to warm up...but after that it's fine.
If U need to use starting fluid, that motor has issues. Start with new plugs, then check fuel lines and hoses. Might need a compression check done too....in fact....do that first.
Now, Donald...please pick John Bolton for your running mate.
|
|
Re: Motor has a hard time on the first start!
[Re: OldFrog]
#4682275
04/01/10 03:09 AM
|
Joined: Apr 2008
Posts: 12,345
PaulGrapevine
TFF Guru
|
TFF Guru
Joined: Apr 2008
Posts: 12,345 |
Starting fluid is bad on two cycle motors......no oil in it. You need to get your motor checked out.
|
|
Re: Motor has a hard time on the first start!
[Re: PaulGrapevine]
#4682517
04/01/10 04:11 AM
|
Joined: Apr 2007
Posts: 3,686
spanky's
TFF Team Angler
|
TFF Team Angler
Joined: Apr 2007
Posts: 3,686 |
Starting fluid is bad on two cycle motors......no oil in it. You need to get your motor checked out. yes it is
 spankysboatrepair@yahoo.com (817)475-4539
|
|
Re: Motor has a hard time on the first start!
[Re: spanky's]
#4683959
04/01/10 04:30 PM
|
Joined: Jan 2008
Posts: 271
EJ2000
Angler
|
Angler
Joined: Jan 2008
Posts: 271 |
check your gas lines... my boat was very hard to start also... replace the gas lines and no problem now....
EJ Irving, Texas
|
|
Re: Motor has a hard time on the first start!
[Re: EJ2000]
#4684004
04/01/10 04:38 PM
|
Joined: Nov 2005
Posts: 4,061
Mike Halfmann the boatmann
TFF Team Angler
|
TFF Team Angler
Joined: Nov 2005
Posts: 4,061 |
On those looper engines, it is very hard to get the carbs totally primed. Next time when you prime the engine, put your ear to the cowling and prime, Quit when you cannot hear anymore fuel entering into the carbs. You are going to be supprised that all this time you only thought you had it primed.
mike halfmann
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|