texasfishingforum.com logo
Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
onlyme, sandeez, Bward, Richard Cantrell, Liteweight
119611 Registered Users
Top Posters(All Time)
TexDawg 124,689
hopalong 121,182
Bigbob_FTW 104,472
Bob Davis 96,299
John175☮ 86,137
Pilothawk 83,923
Mark Perry 74,867
Derek 🐝 68,499
JDavis7873 67,416
Forum Statistics
Forums59
Topics1,057,577
Posts14,286,908
Members144,611
Most Online39,925
Dec 30th, 2023
Print Thread
Help with motor. #3533636 06/02/09 05:08 PM
Joined: May 2008
Posts: 24
C
canepo Offline OP
Outdoorsman
OP Offline
Outdoorsman
C
Joined: May 2008
Posts: 24
My friend has a Johnson 115 and I have to pump the gas bubble while he is driving for it to run properly. If it is not pumped it cuts in and out. Recently the alarm started going off indicating low oil, but there is oil in it. We weren't sure if the problems are related or how to solve them, any help would be appreciated. Thanks

Re: Help with motor. [Re: canepo] #3533651 06/02/09 05:12 PM
Joined: Jul 2005
Posts: 25,961
Frank I Offline
TFF Guru
Offline
TFF Guru
Joined: Jul 2005
Posts: 25,961
Have you tried changing the bulb? Make sure gas line is not cracked, check gas filter.



Originally Posted By: txmasterpo
You guys know everything..... I'm just an idiot....no problem........




Re: Help with motor. [Re: Frank I] #3533773 06/02/09 05:40 PM
Joined: Nov 2008
Posts: 49
B
BASANGLER Offline
Outdoorsman
Offline
Outdoorsman
B
Joined: Nov 2008
Posts: 49


Make sure the fuel line is tight where it is attached to the motor and the fuel tank!!

Re: Help with motor. [Re: BASANGLER] #3533892 06/02/09 06:03 PM
Joined: May 2007
Posts: 920
Terry M Offline
Pro Angler
Offline
Pro Angler
Joined: May 2007
Posts: 920
When I had a Johnson and that happened to me it was the VRO pump that went out. Don't run it because if that is the case it is not getting any oil.

Re: Help with motor. [Re: Terry M] #3533932 06/02/09 06:11 PM
Joined: Oct 2003
Posts: 1,548
V
Vaughn Coomer Offline
Extreme Angler
Offline
Extreme Angler
V
Joined: Oct 2003
Posts: 1,548
Terry is right it's probably the vro which pumps not only fuel but oil to the engine. Do not run it!! On some years it's best to just disconnect the oil side and mix the oil in your fuel tank. Post this on the boat and motor section and you will get a much better answer.

Re: Help with motor. [Re: Vaughn Coomer] #3534134 06/02/09 06:51 PM
Joined: May 2005
Posts: 2,289
T
Texas Guide Fishing - Mark Parker Offline
Extreme Angler
Offline
Extreme Angler
T
Joined: May 2005
Posts: 2,289
Originally Posted By: Vaughn
Terry is right it's probably the vro which pumps not only fuel but oil to the engine. Do not run it!! On some years it's best to just disconnect the oil side and mix the oil in your fuel tank. Post this on the boat and motor section and you will get a much better answer.


Yep all good advise above - especially going to the motor and/or the Genreal equipment section with this problem.

Re: Help with motor. [Re: Vaughn Coomer] #3534135 06/02/09 06:52 PM
Joined: Apr 2007
Posts: 4,175
"
"Da" NITRO Offline
TFF Team Angler
Offline
TFF Team Angler
"
Joined: Apr 2007
Posts: 4,175
Originally Posted By: Vaughn
Terry is right it's probably the vro which pumps not only fuel but oil to the engine. Do not run it!! On some years it's best to just disconnect the oil side and mix the oil in your fuel tank. Post this on the boat and motor section and you will get a much better answer.

thumb


Re: Help with motor. [Re: canepo] #3534223 06/02/09 07:11 PM
Joined: Oct 2006
Posts: 258
W
wycough Offline
Angler
Offline
Angler
W
Joined: Oct 2006
Posts: 258
All the above are right on. I suggest changing bulb every 2 years. Some of these Walmart ones will only last one season. Check the lines and filter for replacement too. Cheap enough. How old is motor? Pump is has a very good possibility of going out. Easy enough to pre-mix as a added security measure once motor and pump get up in age.

Previous Thread
Index
Next Thread

© 1998-2022 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide
Powered by UBB.threads™ PHP Forum Software 7.7.3