I have a 92 GMC truck with an unsightly film on the headlight lens and tail light lens.

Any suggestions on how to remove this film? I rubbed it with polishing compound but it did not improve very much.

Thanks!

3M sells a polish kit that you use with your drill works really well. On the 3M website.

Thanks SN......will give it a try!

tried the polish and wet sand paper on mine(98 suburban,not much help.
clean them as best you can and fine sandpaper off the rough stuff.
then get you a can of Krylon clear and give them a thin spray.
i put two coats on mine and it made a hell of a difference!!!!

take a marine rubbing compund for gelcoats (like 3m) and buff 'em, they'll shine like new, works on glazed head lights too

Flitz metal polish will do wonders as well!

toothpaste

Fluoride or Tartar Control?

Brasso works great on plastic lenses.

i had this happen on my last van i had a guy tell me to get some acrylic polish worked great made look like new lens . Because they are made of acrylic . and they show on the bottle head light lens and tables and stuff on the bottle .

CCP-POL100

Suposed to be the best. Going to order some, will let you know how it goes.

Maas polish. Still have to do it every few months though.