|
Forums59
Topics1,052,284
Posts14,193,354
Members144,484
| |
Most Online39,925
Dec 30th, 2023
|
|
 Ultrex Lift Assist
#15203373
09/28/24 10:00 PM
|
Joined: Aug 2019
Posts: 35
Tom Z
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Aug 2019
Posts: 35 |
I have an 80lb Ultrex with Spotlock and remote control and the 360 thing bolted to it. I ordered a lift assist for it and the assist cylinder I received is too long to mount the way the gas spring is mounted. It has a pivot bracket attached to it but my unit has no holes to attach that pivot bracket to the outer arm. If I drill the mounting holes for the pivot bracket, how do I locate the holes ?? Thanks for help TFF gurus.
|
|
 Re: Ultrex Lift Assist
[Re: Tom Z]
#15204180
09/29/24 10:32 PM
|
Joined: Nov 2010
Posts: 5,144
Wayne P.
TFF Celebrity
|
|
TFF Celebrity
Joined: Nov 2010
Posts: 5,144 |
If you were upgrading the gas spring for a stronger one with a current mount, you would have the proper attachment holes. You remove one gas spring and install the new one in its place. You must have ordered the stronger gas spring for the current mount, and you have the older Ultrex. If you want to use it, you have to figure out where to drill the holes for the two screws. There is no template for a modification. That gas spring is for the added total weight of a MEGA 360, Target Lock, and MEGA LIVE. I had mine done like this before there was a Minnkota upgrade mount and gas spring. ![[Linked Image]](https://i.postimg.cc/50y1SMw6/Dual-gassprings.jpg)
Last edited by Wayne P.; 09/29/24 10:36 PM.
Helix 12 CHIRP MEGA SI+ GPS G4N, SOLIX 10 G3, Helix 15 CHIRP MEGA SI+ GPS G4N,
Helix 8 CHIRP MEGA SI+ GPS G4N, SOLIX 12 G3, MEGA 360, MEGA LIVE TL
|
|
|
Re: Ultrex Lift Assist
[Re: Tom Z]
#15204184
09/29/24 10:41 PM
|
Joined: Nov 2010
Posts: 5,144
Wayne P.
TFF Celebrity
|
|
TFF Celebrity
Joined: Nov 2010
Posts: 5,144 |
Without doing any modifications, you could have just ordered a replacement gas spring for the older 36V motor and it would be a direct change to a stronger one that is 860N.
I did that when I just had the MEGA 360 before I added the Target Lock and MEGA LIVE.
Changed the 640N to 860N.
Last edited by Wayne P.; 09/29/24 10:57 PM.
Helix 12 CHIRP MEGA SI+ GPS G4N, SOLIX 10 G3, Helix 15 CHIRP MEGA SI+ GPS G4N,
Helix 8 CHIRP MEGA SI+ GPS G4N, SOLIX 12 G3, MEGA 360, MEGA LIVE TL
|
|
|
Re: Ultrex Lift Assist
[Re: Wayne P.]
#15204993
09/30/24 08:15 PM
|
Joined: Aug 2019
Posts: 35
Tom Z
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Aug 2019
Posts: 35 |
Very cool, thank you both. I'll try the 36v unit switch first. Drilling those holes would not be such a big deal in the shop on a bench, not so much on the boat in the storage shed.
Fish in the box !!
TC
|
|
|
Re: Ultrex Lift Assist
[Re: Tom Z]
#15206003
10/01/24 08:56 PM
|
Joined: Nov 2010
Posts: 5,144
Wayne P.
TFF Celebrity
|
|
TFF Celebrity
Joined: Nov 2010
Posts: 5,144 |
Very cool, thank you both. I'll try the 36v unit switch first. Drilling those holes would not be such a big deal in the shop on a bench, not so much on the boat in the storage shed.
Fish in the box !!
TC 2288405 is the 860N gas spring
Helix 12 CHIRP MEGA SI+ GPS G4N, SOLIX 10 G3, Helix 15 CHIRP MEGA SI+ GPS G4N,
Helix 8 CHIRP MEGA SI+ GPS G4N, SOLIX 12 G3, MEGA 360, MEGA LIVE TL
|
|
|
Re: Ultrex Lift Assist
[Re: Wayne P.]
#15206138
10/01/24 11:09 PM
|
Joined: Aug 2019
Posts: 35
Tom Z
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Aug 2019
Posts: 35 |
Ya that's the one I ordered. I didn't want to have to drill those holes, probably didn't have to be THAT accurate, just sayin'. Some improvement in the heavy lift will be welcome.
TC (old)
|
|
|
Re: Ultrex Lift Assist
[Re: Wayne P.]
#15209742
10/05/24 11:59 PM
|
Joined: Jun 2012
Posts: 660
El Skeeter
Pro Angler
|
|
Pro Angler
Joined: Jun 2012
Posts: 660 |
Thank you guys for your information as I m planning on upgrading lift assist!
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
