Can they be had locally? I was fishing the SOT around the mouth of Little Caney and had my poles deployed fishing a drop off in the wind and heard a popping noise, didn’t think that much of it until I raised my poles and half of the port side one was missing. I need the outer knuckle and the pole.

Not sure of your local scene but you can get them on the website and get them almost as quick.

https://power-pole.com/accessories/anchor-parts?cat=246

Go to the Power Pole Support trailer at tournament HQ. They'll probably fix for free.

Didn't see it, Minn Kota was there with the Raptor.

Got a job ticket going with Power Pole, I’ll let y’all know how it turns out.

You'll get a spike and the parts to attach. They do a good job. You can buy the rebuild kits at Bass Pro/Cabelas, and most Boat Dealers or directly from PP if you want to do more of a service on them.

Parts ordered just had to pay for the knuckle and hardware the replacement poles are free. Freight and everything just shy of $230. Ordered two of the poles because the other one is cracked.

Parts came in, going to install them in the morning. The anchor shafts appear to be slightly longer that the originals.

Install complete. Took about 30 minutes to change both poles and the knuckle. If you have to do this definitely order the hardware kit. It comes with a spreader you are going to need that to get the knuckle out. Loosen all the bolts on the rails and insert the oval part of the spreader in the rail near the knuckle and twist 90 degrees. Hardware kit also comes with new bolts, nuts, washer, and bushings just in case……..Tools needed: Two 9/16 inch wrenches, two 1/2 inch wrenches, a rubber mallet, and a descent size flat blade screw driver for a pry bar.