I have a 1222 with the 32 transducer. My refresh rate got jumpy and then I see a curved line at about 20 feet out. I turned off and back on and now I have no readings or static on upper 2 quadrants and now range wa 12 feet even when set on longer distances. It’s the lower beam only it looks like. Turned off. Factory reset and now a zig zag of static top to bottom. Green flash on black box as usual. Maps are fine and smooth refresh. Help

Wires pinched or cut some where ?

Do you have the new style with a single cable coming out of the transducer or the older style with 2 cables. Older style is prone to having wires break internally. Garmin used to replace them for free but not so sure now as its been a few years.

Not any visible pinches or snags

Old double cable. Inspected every inch. No pinches crimps or tears.

Doesn’t need physical damage. There’s 28ga wire in there that breaks over time from minimal movement, ask me how I know.

Oh wow. And they want 310$ plus tax to trade for a new one. Bad design flaw.

Considering it’s out of warranty and used ones bring more than that it’s not too bad of a deal.

Agree! Should I add that money to a big chunk and get the 34?