|
Forums59
Topics1,058,788
Posts14,308,631
Members144,639
| |
Most Online39,925
Dec 30th, 2023
|
|
 More gates
#14417770
07/12/22 01:34 AM
|
Joined: Mar 2016
Posts: 3,508
malibu6501
OP
TFF Team Angler
|
|
OP
TFF Team Angler
Joined: Mar 2016
Posts: 3,508 |
These will be horizontal 2x6 gates to match the fence. Then there's a third over an existing slab that will be a partial fence build too. Prob 200 yards from the beach. So stainless. 2x6 on both sides to 4 ft high, so heavy. Doing a kreg joint on corners with x braces for support. Always fun.
sobermalibu6501
|
|
|
Re: More gates
[Re: malibu6501]
#14418603
07/12/22 10:09 PM
|
Joined: Mar 2016
Posts: 3,508
malibu6501
OP
TFF Team Angler
|
|
OP
TFF Team Angler
Joined: Mar 2016
Posts: 3,508 |
One gate frame done. The corners are not screws into endgrain but rather kreg joints using the xl jig. ![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2022/07/full-100487-145932-20220712_170110_hdr2.jpg)
sobermalibu6501
|
|
|
Re: More gates
[Re: malibu6501]
#14419498
07/13/22 10:41 PM
|
Joined: Mar 2016
Posts: 3,508
malibu6501
OP
TFF Team Angler
|
|
OP
TFF Team Angler
Joined: Mar 2016
Posts: 3,508 |
Second verse, same as the first. Both are loaded in the p/u and headed across the ferry manana. Plan is to mount these two and place the horizontal 2x6 pickets Then I have about a 20 foot section of fence to build on an existing slab under the stilt home. I'll build the gate on site for that section. ![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2022/07/full-100487-146046-20220713_112432_hdr4.jpg)
sobermalibu6501
|
|
|
Re: More gates
[Re: malibu6501]
#14420844
07/15/22 02:54 PM
|
Joined: Sep 2017
Posts: 5,880
pop r
TFF Celebrity
|
|
TFF Celebrity
Joined: Sep 2017
Posts: 5,880 |
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
