Forums59
Topics1,046,043
Posts14,082,897
Members144,357
|
Most Online39,925 Dec 30th, 2023
|
|
lowrance gen 2 touch issues
#14408831
06/30/22 04:14 PM
|
Joined: Jul 2014
Posts: 192
Wrangler1
OP
Outdoorsman
|
OP
Outdoorsman
Joined: Jul 2014
Posts: 192 |
I have 3 gen 2 touch 12s ethernet connected. Everything worked fine, then one trip I put the 2 console units on standby and when I went to move to the next spot, the unit I have down/side imaging on started to delay as well as the other unit that is mapping/2D sonar and on this unit, it would pause up to about 5 seconds then display a white line vertically down the screen, read a few seconds and repeat. It also quit reading depth on the unit. This happens on the front unit as well that has the same display-mapping/2D on it. I changed out the battery and ordered a new transducer, did the same thing. Connected the old transducer back up and everything worked for the next trip but then started doing it again. Anyone have any ideas on how to fix this issue?
|
|
Re: lowrance gen 2 touch issues
[Re: Wrangler1]
#14408908
06/30/22 05:40 PM
|
Joined: Mar 2010
Posts: 26,885
T Bird
TFF Guru
|
TFF Guru
Joined: Mar 2010
Posts: 26,885 |
Rob Jasper Lowrance Pro-Staff member should be able to offer some advice. He's on this site frequently.
Okie by birth, Texan by choice. ![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2021/01/full-47849-80883-111.jpg) USAF "Thunderbirds" Alumni 1985-1989
|
|
Re: lowrance gen 2 touch issues
[Re: Wrangler1]
#14408978
06/30/22 06:49 PM
|
Joined: Oct 2020
Posts: 409
Larry Hutchens Lowrance Pro S
Angler
|
Angler
Joined: Oct 2020
Posts: 409 |
I would disconnect all ethernet cables from all 3 units and determine if its till doing the lagging. If it is still doing it then take that unit and do some Maintenace on it. Back up your Waypoint routes and Trails Do a do a factory reset and check the boxes for everything test if its works then import your data back in. This is actually something you should do with all your units if never been done. Also if you do a lot of installing and deleting waypoints then make sure you purge everytime. Not doing this will slow down the processor especially on the older units. This may be just a start to tracking everything down that is going on. Let us know as you move through this.
Lowrance On Water Training www.LowranceOnWater.com Lowrance Pro-Staff since 1986 Bass and Crappie Fishing, Hunting, Farming, On Water Training , Exploring Texas and its history.
|
|
Re: lowrance gen 2 touch issues
[Re: Wrangler1]
#14409684
07/01/22 03:26 PM
|
Joined: Oct 2005
Posts: 979
Rob Jasper Lowrance Pro-Staff
Pro Angler
|
Pro Angler
Joined: Oct 2005
Posts: 979 |
Thanks T-Bird. Been a few days since I checked. I like Larry's advice - solid. Have a great 4th of July weekend guys.
Rob Jasper
|
|
Re: lowrance gen 2 touch issues
[Re: Wrangler1]
#14426272
07/21/22 03:48 PM
|
Joined: Jul 2014
Posts: 192
Wrangler1
OP
Outdoorsman
|
OP
Outdoorsman
Joined: Jul 2014
Posts: 192 |
Thanks for the advice, I was finally able to get back on the water and unhooked the ethernet cables, still did the same thing. I did the hard reset on the unit that I have hooked up to the down/side imaging transducer and still the same. Any other options would be appreciated. Thanks!
|
|
Re: lowrance gen 2 touch issues
[Re: Wrangler1]
#14428638
07/24/22 06:45 AM
|
Joined: Oct 2020
Posts: 409
Larry Hutchens Lowrance Pro S
Angler
|
Angler
Joined: Oct 2020
Posts: 409 |
put overlays on all 3 units for voltage and what does it read when its acting up/
Lowrance On Water Training www.LowranceOnWater.com Lowrance Pro-Staff since 1986 Bass and Crappie Fishing, Hunting, Farming, On Water Training , Exploring Texas and its history.
|
|
|