How many graphs can be run off cranking battery? I am looking at buying livescope to complement the 360.

Read my post above. I ran those graphs using a group 31 X2 for a cranking battery and never had an issue starting my big motor. Recently switched to a 125a Ionic. It puts the X2 to shame

I run four off my cranking battery along with a 3DModule and a ActiveTarget Module. You just have to get a big battery. I run the big NorthStar. No problems.

The X2 from batteries plus is a hoss. I run the X2 for cranking and it also powers a 15” solix and 12” helix. I have a 36v lithium for my TM. If I added another graph I would most likely add an additional dedicated battery for graphs.

I run a Helix 12 at the console, 10 and 12 up front. 10 up front is dedicated to charts/di/sonar and 12 is dedicated to m360.

My electronics are worth more than my boat. All Garmin: 1243 and 106sv up front with two LVS32's and a Garmin Force trolling motor.1042, 8610, UHD73sv and Striker 7sv at the console.

Retired grass grower

I had 2 12’s at the bow and couldn’t stand it, too much clutter. I’d like to put a 16” up there and might eventually. The money never stops flowing.

I can see the advantage of multi screens- just not for me.. Two 15's with split screen capability is my choice.

THIS 95 p2 W/ 200EFI-200O model. No scope yet 2 H B s

I just added a Str8up dual mount on the bow of my Champ yesterday. Helix 10 and 102sv ultra Garmin. Both will do side/down/2D and maps but I put the Livescope kit in yesterday for the Garmin. Helix 10 at the helm DI/SI/2D and mapping I'm done for a while..

I have a flush mount 16 at the bow and a 16 at the console, it is on a boat logic bracket I think, I did not like the stacked graphs on bow.

I wish I could pull satellite TV on mine

I have Lowrance HDS12" at console with split screen and Lowrance 12" at bow along with Garmin that's just for the livescope.