|
|
|
Forums59
Topics1,038,881
Posts13,954,746
Members144,181
| |
Most Online39,925
Dec 30th, 2023
|
|
 Lowrance Graphs
#14212689
12/06/21 02:35 AM
|
Joined: Apr 2013
Posts: 427
IKELEVI
OP
Angler
|
|
OP
Angler
Joined: Apr 2013
Posts: 427 |
I have an HDS 12 Gen 3 with the structure transducer and a HDS 10 Gen 1. Can they be linked together by just using the NMEA or do I have to have the LSS 1? I have an LSS1 but it's not installed. Thank you
17 LEGEND V20
17 MERCURY 250 Optimax ProXs
22 Ram 2500 4x4 6.7 Cummins
|
|
|
Re: Lowrance Graphs
[Re: IKELEVI]
#14212853
12/06/21 01:25 PM
|
Joined: Oct 2005
Posts: 979
Rob Jasper Lowrance Pro-Staff
Pro Angler
|
|
Pro Angler
Joined: Oct 2005
Posts: 979 |
NMEA will not transfer structure scan data, only Ethernet will do this. It would be best to install your LSS1 if you are wanting structure scan on your Gen-1. You can probably pick up a Gen-3 fairly cheap or the Carbon units that you can find at this time at Bass Pro or Cabela's.
Rob Jasper
|
|
|
Re: Lowrance Graphs
[Re: IKELEVI]
#14214320
12/07/21 11:48 PM
|
Joined: Feb 2018
Posts: 70
Nysrx
Outdoorsman
|
|
Outdoorsman
Joined: Feb 2018
Posts: 70 |
The LSS1 will not hook up direct to your gen 1 with out a structure scan module. You can hook the 2 together with Ethernet but will put your gen 3 in legacy mode.
|
|
|
Re: Lowrance Graphs
[Re: Nysrx]
#14214708
12/08/21 01:46 PM
|
Joined: Oct 2020
Posts: 367
Larry Hutchens Lowrance Pro S
Angler
|
|
Angler
Joined: Oct 2020
Posts: 367 |
The LSS1 will not hook up direct to your gen 1 with out a structure scan module. You can hook the 2 together with Ethernet but will put your gen 3 in legacy mode. Legacy Mode Only occurs when a Lowrance Unit older than Gen 3 is hooked to a HDS LIve unit. Gen 3 units are fully compatable with HDS units gen 1 and 2 so no worries
Lowrance On Water Training www.LowranceOnWater.com Lowrance Pro-Staff since 1986 Bass and Crappie Fishing, Hunting, Farming, On Water Training , Exploring Texas and its history.
|
|
|
Re: Lowrance Graphs
[Re: IKELEVI]
#14215075
12/08/21 06:22 PM
|
Joined: Apr 2013
Posts: 427
IKELEVI
OP
Angler
|
|
OP
Angler
Joined: Apr 2013
Posts: 427 |
So I can just hook my gen 3 to the gen 1 and see structure scan at both?
17 LEGEND V20
17 MERCURY 250 Optimax ProXs
22 Ram 2500 4x4 6.7 Cummins
|
|
|
Re: Lowrance Graphs
[Re: IKELEVI]
#14215126
12/08/21 07:11 PM
|
Joined: Feb 2018
Posts: 70
Nysrx
Outdoorsman
|
|
Outdoorsman
Joined: Feb 2018
Posts: 70 |
Gen 3 will not Ethernet to a gen 1. It won’t even work with a gen 2 unless you are running the 7.0 software on your gen3. If your gen 3 has the latest 18.xxx softwares it will not even work with a gen 2 you have to revert back to 7.0. If you have the lss1 with the module you may be able to hook both to the module to read structure scan from the lss1. It’s just a guess I am not for sure.
Last edited by Nysrx; 12/08/21 07:17 PM.
|
|
|
|
|
|
