I did it to my Skipjack. Not too difficult just time consuming. I would recommend using some 4200 around the edges to keep water from getting under specially if you have anti-slip deck.
DIY.....It's VERY easy to install. The Chinese stuff I bought off of Amazon has proven to be pretty darn good to date, but, it's only been down for a month. However, some have had great results for over a year, so I anticipate same.
Watching some of the pro events you can hear their shoes “squeaking” on the sea deck.. how is this material as far as slip resistance? I’d like to do the floor pan of my boat with sea deck then carpet the front and back decks.
Lake Worth Workingmans Tournaments Every Wednesday from April 2nd to end of August $50 entry + $10 Side Pot - 100% Payout 6pm - 9pm
Watching some of the pro events you can hear their shoes “squeaking” on the sea deck.. how is this material as far as slip resistance? I’d like to do the floor pan of my boat with sea deck then carpet the front and back decks.
That's exactly what I did, in fact, I built my own "marine grade" carpet. I like it much better than normal boat carpet. Lowes "indoor-outdoor" (5 or 10 year guarantee...can't remember) glued to .25 roofing rubber glued to the decking. I'm amazed how easy it is to clean and how fast it dries. I used the foam based stuff in the well and it seems like it's going to work out perfectly.
![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2021/11/full-49627-117450-302f2d21_fcfe_4de5_8b9c_e9691cf45be0.jpeg)
![[Linked Image]](http://handtiedcrappiejigs.com/images/image_zpsxmlbzr04.GIF)
