|
Forums59
Topics1,058,567
Posts14,304,686
Members144,630
| |
Most Online39,925
Dec 30th, 2023
|
|
 sealant
#14171052
10/25/21 08:16 PM
|
Joined: Dec 2007
Posts: 114
pocove
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Dec 2007
Posts: 114 |
I am going to change out my livewell pump which goes thru the back of the boat. What type of sealant should I use to make sure the new motor does not leak into the boat.
|
|
|
Re: sealant
[Re: pocove]
#14171144
10/25/21 09:53 PM
|
Joined: Feb 2006
Posts: 4,064
bronco71
TFF Team Angler
|
|
TFF Team Angler
Joined: Feb 2006
Posts: 4,064 |
3M 4200, don't use 5200 unless you never want to remove it again without destroying the gelcoat.....
1987 Nitro MX185/Mercury Black Max 150 (needs lots of work, put motor on nephew's boat)
1994 XSC-2200 "Jaguar" AKA Shadow 22 Magnum (restoring w/Mercury 200 XRI)
1994 Pantera II (restoring w/Mercury 200 EFI)
1999 Triton TX21/225 Mercury Optimax
|
|
|
Re: sealant
[Re: pocove]
#14171146
10/25/21 09:56 PM
|
Joined: Apr 2017
Posts: 15,243
tmd11111
TFF Guru
|
|
TFF Guru
Joined: Apr 2017
Posts: 15,243 |
If the pump is a cartridge type and the through fitting is good then just replace the cartridge. If its not then consider going to that type and being below the water line I'd use 5200.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
