|
Forums59
Topics1,059,383
Posts14,319,154
Members144,651
| |
Most Online39,925
Dec 30th, 2023
|
|
 Lowrance Issue
#14138474
09/23/21 11:02 AM
|
Joined: Mar 2003
Posts: 3,369
Bullet[BS]
OP
TFF Team Angler
|
|
OP
TFF Team Angler
Joined: Mar 2003
Posts: 3,369 |
I am running HDS 12 GEN 2 up front and Gen 3 in the back with structure scan. Front finder will not show on my map contour lines unless I have the structure scan module powered up. I cannot find the setting to change this does anyone have any ideas?
When in doubt SET THE HOOK! 
|
|
|
Re: Lowrance Issue
[Re: Bullet[BS]]
#14138882
09/23/21 05:50 PM
|
Joined: Oct 2020
Posts: 456
Larry Hutchens Lowrance Pro S
Angler
|
|
Angler
Joined: Oct 2020
Posts: 456 |
Do you have a SS Box? if so the ethernet is most likey going through the box. Cut the power and no more networking so no more sharing.
Lowrance On Water Training www.LowranceOnWater.com Lowrance Pro-Staff since 1986 Bass and Crappie Fishing, Hunting, Farming, On Water Training , Exploring Texas and its history.
|
|
|
Re: Lowrance Issue
[Re: Bullet[BS]]
#14139020
09/23/21 08:18 PM
|
Joined: Dec 2008
Posts: 18,023
grout-scout
TFF Guru
|
|
TFF Guru
Joined: Dec 2008
Posts: 18,023 |
Simple fix is to run one Ethernet cable directly to each graph through the extra port on back. (Assuming the gen3 is a 9 or 12)
|
|
|
Re: Lowrance Issue
[Re: Bullet[BS]]
#14139496
09/24/21 10:57 AM
|
Joined: Mar 2003
Posts: 3,369
Bullet[BS]
OP
TFF Team Angler
|
|
OP
TFF Team Angler
Joined: Mar 2003
Posts: 3,369 |
Thank you I will get a yellow cord and run it from graph to graph but one thing I forgot to say was I have a navionics chip in the front graph, yes they are networked to share waypoints.
When in doubt SET THE HOOK!
|
|
|
Re: Lowrance Issue
[Re: Bullet[BS]]
#14139694
09/24/21 01:48 PM
|
Joined: Dec 2008
Posts: 18,023
grout-scout
TFF Guru
|
|
TFF Guru
Joined: Dec 2008
Posts: 18,023 |
You really don’t need the module anymore, if you want to simply your setup. You’ll have to move the lss ducer plug to one of the graphs. Then move your Ethernet over too, get rid of the module and it’ll work all the time.
|
|
|
