I copied his set up as well.. the ammo box he uses is ok, but u may want to put a lid cable on it. if the lid opens all the way back, the hinge comes undone and the lid falls off the box. I also put a luggage strap on the sides of the box, so I can carry the box and poleducer easily when I remove the system from my boat and put it inside. The box he uses is large, a smaller box can be used. I velcro my battery to the bottom of the box, and mounted black box module to the side.

The Poleducer now comes standard with the 2" x 3" rectangle base mount instead of the 3.68" round base and our new one-piece Ram Mount on the sleeve instead of the two u-bolts. This thing is solid. You can increase tension on the shaft by simply tightening one screw on the sleeve Ram Mount. Once you deploy the Poleducer you simply raise and lower it all day as you move from stop to stop with the adjustment collar. No need to stow the Poleducer until you get back on the trailer.

Fishing Specialtys .com

Fishing Specialties or home made devices appear to be the only way to go !!

If you want the best one on the market get a Beatdown Outdoors. Simply the best out there.

This^^^

I personally like the one Ron Duran makes. and he is Lake Lewisville local.

Liftsavertmmount.com

I'll check them out.

Pulled the trigger on fishing specialties for Nautic Star 2110 on Wednesday . Looking forward to putting said equipment to work. Thanks one and all for support and advise. Have been fishing with Scott Bradshaw lately. He has been instrumental in my renewed interest in " The Thump " .

glad you got bit by the crappie bug again. it is fun as heck!

The All Aboard All Sync mount for ultrex has caught my eye as one that could suit me good. Turns with the trolling motor, just like it was on the trolling motor shaft, when you want it to OR you can disengage that function easily and turn it with a handle by twisting the handle, instead of side to side, when you want to aim it and be spot locked. I think I would like it more than a separate pole mounted somewhere or just an electric one... but I don't know.... just getting into the live stuff but I know I probably want it off the trolling motor.

I recently purchased my 3rd PoleDucer from David at Shut-Up-and-Fish. I purchased the 1st unit a couple of years ago, installing it on a G3. I picked up a new boat early this year and built a standalone Livescope set up to fish for crappie fishing. I recently took delivery of a Mega Live, so I purchased a 3rd unit for a permanent install.

One of my fishing partners inadvertently stepped on one of the Poleducers when he lost his balance. I needed a replacement pole and David is taking care of shipping me the replacement at no cost.

David provides great service, as well as outstanding customer support! I really appreciate him taking the extra effort to keep customers happy.

Thanks again David for all that you have done to help me out!

I'm still using David's Shut-Up-And-Fish Poleducer after two years. No problems to date and I don't have the new improved model. He's local, supports many clubs/fishing activities, and superior customer service.

Gonz is Steve with Limits Tackle, he has vids of the Beatdown pole on his Facebook page.....PM him for a quote....