I have 40 2020 Falcon Lowriders. At least one of each...several of the Lizard Draggers and several Heavy Cover Jigs. A few of the different Crankers. A Shaky head, two Mansfields, and a Drop Shot. So I guess I am obligated to say they are my favorite rods. Especially when cost is a factor.

Reels run the gamut from mostly Lews Team stuff, Shimano mid to lower mid level stuff (chronarchs and Curados), and a handful of older non-twinged Steez reels.

I have three setups ALWAYS on the deck.

A Falcon Lowrider Shaky head spinning rod (for Senkos) with a Shimano Stradic Ci4 250 sized reel.
A Falcon Lowrider Lizard Dragger BC with a Diawa Steez 6.3 reel for Shaky heads. Haha.
A Falcon Lowrider Flipping rod with a Lews Custom Lite SLP 7.5 for, well..Flipping

Delta Edgerod by Gary Loomis with a Daiwa Tatula 150 reel. I've been slowly swapping out my stcroix and gloomis rods for the edgerods. They have carbon fiber handle which allows more feeling than cork or foam that absorbs vibrations. I've already switched out most of reels to the Tatula 150 reels.

I'm normally not critical of what anyone uses but have to draw the line at Edge Rods. I fell for their marketing gimmicks on FB and bought two. Worst customer service I've ever seen in my life and both rods looked like they were assembled by a drunk monkey.

This is some straight facts! The rods look amazing and were pretty sensitive for all things considered but when you have issues with the rods and contact customer service you will be in for a big awakening!

Back in Oct. '18 I ordered a Delta rod from them. 8 weeks later it showed up broken in half from the cheap rod tube it was sent in. I called and got someone on the phone the same day. He gave me an email to send pictures to and said they would send out a replacement. Aside from being broken in half it looked to be a surprisingly nicely built rod for $149 so I went ahead and ordered a second one. Two months later and over a dozen attempts to get ahold of someone on the phone and email I finally connected. This time the lady I spoke with knew nothing of my broken rod and had no update on the second rod I ordered. After all the confusion was cleared up I think it was another 6 weeks before I got a replacement for the broken one. This one looked to be assembled by a drunk monkey. Lower rod handle was glued on crooked and the sharp edges right below the reel seat sliced my hand open. Instead of even bothering with customer service I sanded down the sharp edges of the graphite handle. A few weeks later the second rod finally showed up. This one had two eyelets on the rod guides glued over. Took it to a local guy to have them replaced. I've wasted more on less in my life by I will never buy another rod from them going forward.