DIY floating ramp/dock for kayaks or other vessels under 300lbs or so

DIY floating ramp/dock for kayaks or other vessels under 300lbs or so #13854937 01/21/21 03:45 PM
Joined: Apr 2008 Posts: 45,570 Dallas, TX C CCTX OP mapquest
OP CCTX mapquest C Joined: Apr 2008 Posts: 45,570 Dallas, TX	Originally Posted by CCTX PVC—I used 1.5” schedule 40. Quantity of ten in five foot length. 2” outside deck screws (100) Fender washers (100) Rubber garden hose 50ft light duty Dock fender floats D rings/anchors/cleats Rope I’ll add some more garden hose cross supports (ran out of screws and washers—used 100 so far) Portable, removable, weighs about 30lbs

Re: DIY floating ramp/dock for kayaks or other vessels under 300lbs or so [Re: CCTX] #13858844 01/24/21 02:18 PM
Joined: Apr 2008 Posts: 45,570 Dallas, TX C CCTX OP mapquest
OP CCTX mapquest C Joined: Apr 2008 Posts: 45,570 Dallas, TX	Works better than imagined Designed so back third sinks so you could just drive up onto the ramp. I’ll actually add a little more floatation all the way to the very back 1/4 just to have the perfect amount of front and middle bouyancy.

Hop To