Our new Charger 210 should be in within a couple of weeks. I will have 2 HDS12s at the console and 1 HDS at bow. I have a game plan for the bow unit but I haven't made my mind up for the console yet. I'm torn between the two options:
1) One flush mounted and one on Ram Mount (or comparable mount)
2) Both 12s on dual mount on dash

If you have a Charger and have pics, I'd love to see them. If you have some good input on a setup, please tell me.

Thanks.

Not a charger, but it's the same dash. If you don't have you're gauges mounted in the upper part of the dash (which is an option), you can go with a Bass Boat Technologies mount. The graphs pictured below are 10s, but 12s will fit.

I used this mount on my Skeeter console. I can see the console graph from the bow if I wanted to.

I was going to mount a Helix 10 on a Balzout mount on my Ranger and leave the Lowrance in the dash but I haven't decided completely.

I might go with the BBT mount on the dash and space the steering wheel out.

I use a Bass Boat Technologies bracket up front on the Helix 10.

I would avoid cutting a big hole on a flush mount. I have a 12 on a bbt mount. Great visibility. It covered the hole left by the hds 8. I also have a hds 7 on a ram out to the side. When you want to upgrade or change, and you will, it will be easier without the big hole. I don�t put the 7 on all the time so I have that option. Congrats on the new Charger! I owned a couple many years ago. Fine boat. Good luck JD