|
|
|
Forums59
Topics1,039,304
Posts13,962,597
Members144,199
| |
Most Online39,925
Dec 30th, 2023
|
|
 Simrad 7
#13128381
04/19/19 08:45 PM
|
Joined: Mar 2015
Posts: 21
Lloper
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Mar 2015
Posts: 21 |
I’m having problems with my simrad 7 with total scan transducer. I’m not getting clear images. I need someone to walk me through the settings. Simrad says I need to move transducer to left side instead of right side. Boarding ladder is on left side which scares me. Since prop spins to the right would it cause problems even at idle speeds. I can post pictures if necessary.
|
|
|
Re: Simrad 7
[Re: Lloper]
#13128464
04/19/19 10:52 PM
|
Joined: Mar 2015
Posts: 21
Lloper
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Mar 2015
Posts: 21 |
|
|
|
Re: Simrad 7
[Re: Lloper]
#13128623
04/20/19 02:17 AM
|
Joined: Dec 2008
Posts: 16,193
grout-scout
TFF Guru
|
|
TFF Guru
Joined: Dec 2008
Posts: 16,193 |
Man it looks close to that rear ratchet strap! It should work fine over there, you’re low enough to not have any blockage. I suppose you might have some lower unit blockage if your motor is tucked in all the way.
Any pics of the bad images? Are they fuzzy or what’s the problem?
|
|
|
|
|
|
![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2019/04/full-95269-9221-2028dbb0_f936_4809_8bf9_e74486438559.jpeg)
![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2019/04/full-95269-9224-b05fb1cb_c7aa_4134_9587_32332f072ecd.png)