Forums59
Topics1,052,590
Posts14,199,876
Members144,496
|
Most Online39,925 Dec 30th, 2023
|
|
Re: Lowrance SONAR
[Re: jsplinter]
#12883866
09/01/18 01:46 PM
|
Joined: Aug 2018
Posts: 11
Wyoboy
Green Horn
|
Green Horn
Joined: Aug 2018
Posts: 11 |
Many thanks MAK747--i couldn't find that tech bulletin but the search did lead me to discussions of Live Network Sonar and how it would only work with software update 56 and above (which Gen2Touch doesn't have--by Lowrance's choice i imagine). However, when you say i can display two different frequencies from the same transducer are you saying the Totalscan can generate 83 and 200 simultaneously as well as the 455/800 for the structure ? If so i guess that's a decent consolation prize.
|
|
Re: Lowrance SONAR
[Re: jsplinter]
#12883996
09/01/18 04:13 PM
|
Joined: Jan 2007
Posts: 2,465
UJC
Extreme Angler
|
Extreme Angler
Joined: Jan 2007
Posts: 2,465 |
Totalscan Question:
I have the TS mounted on the Trolling Motor. Settings have the TS as the transducer. Why are the depth readings on a split screen different? It can be from 1' to almost 2' difference between DI and 2D. I'm puzzled. Also, offset settings are zero. Thanks.
|
|
Re: Lowrance SONAR
[Re: jsplinter]
#12884276
09/01/18 09:38 PM
|
Joined: Mar 2009
Posts: 263
EDO
Angler
|
Angler
Joined: Mar 2009
Posts: 263 |
Im installing a HDS g3 on bow and a Carbon on console, both 12" units. Total scan transducer on trolling motor and structure scan 3d transducer plus a 2d/200khz pod transducer on back of boat. I have the graphs installed and I was contemplating installing and connecting all the wires myself. Couple of questions I have that TFF may be able to assist with.
NEMA 2000 power supply. manual says "do not connect power cables to same terminals as engine start battery or other high current devices" So don't connect NEMA 2000 power to cranking battery?
NEMA power supply should be connected to a key on power supply. I can find this under the console but all accessories are powered off cranking battery. Are they saying just don't connect to cranking battery at battery terminals where starter is connected?
Similar question for power supply to 3d module and two units.
Is it best to run dedicated power supply/wires from battery to graphs and module and if so how would I get that to be on key on circuit.
|
|
Re: Lowrance SONAR
[Re: Wyoboy]
#12884312
09/01/18 10:10 PM
|
Joined: Aug 2018
Posts: 267
Dwight Hardy
Angler
|
Angler
Joined: Aug 2018
Posts: 267 |
Many thanks MAK747--i couldn't find that tech bulletin but the search did lead me to discussions of Live Network Sonar and how it would only work with software update 56 and above (which Gen2Touch doesn't have--by Lowrance's choice i imagine). However, when you say i can display two different frequencies from the same transducer are you saying the Totalscan can generate 83 and 200 simultaneously as well as the 455/800 for the structure ? If so i guess that's a decent consolation prize. Yes you can view all four if you set up a 4 split screen 83 and 200 on sonar and 455 and 800 on di and si Cannot do it with the SS3D
Last edited by Dwight Hardy; 09/01/18 10:19 PM.
|
|
Re: Lowrance SONAR
[Re: EDO]
#12884315
09/01/18 10:16 PM
|
Joined: Aug 2018
Posts: 267
Dwight Hardy
Angler
|
Angler
Joined: Aug 2018
Posts: 267 |
Im installing a HDS g3 on bow and a Carbon on console, both 12" units. Total scan transducer on trolling motor and structure scan 3d transducer plus a 2d/200khz pod transducer on back of boat. I have the graphs installed and I was contemplating installing and connecting all the wires myself. Couple of questions I have that TFF may be able to assist with.
NEMA 2000 power supply. manual says "do not connect power cables to same terminals as engine start battery or other high current devices" So don't connect NEMA 2000 power to cranking battery?
NEMA power supply should be connected to a key on power supply. I can find this under the console but all accessories are powered off cranking battery. Are they saying just don't connect to cranking battery at battery terminals where starter is connected?
Similar question for power supply to 3d module and two units.
Is it best to run dedicated power supply/wires from battery to graphs and module and if so how would I get that to be on key on circuit.
If you are only conecting the two units I dont think you need the NEMA 2000 system. Just connect the two units together with an eithernet cable.
|
|
Re: Lowrance SONAR
[Re: jsplinter]
#12884343
09/01/18 10:50 PM
|
Joined: Mar 2009
Posts: 263
EDO
Angler
|
Angler
Joined: Mar 2009
Posts: 263 |
I'm also connecting a Point one heading sensor
|
|
Re: Lowrance SONAR
[Re: jsplinter]
#12884435
09/02/18 01:01 AM
|
Joined: Dec 2006
Posts: 3,305
Dayne
TFF Team Angler
|
TFF Team Angler
Joined: Dec 2006
Posts: 3,305 |
The point 1 is nema so you will need it as well as the ethernet.
|
|
Re: Lowrance SONAR
[Re: jsplinter]
#12884789
09/02/18 02:51 PM
|
Joined: Aug 2018
Posts: 11
Wyoboy
Green Horn
|
Green Horn
Joined: Aug 2018
Posts: 11 |
Thanks Dwight Hardy--can i set up a 4 split with any combination of frequencies i want? e.g. low chirp, high chirp, 83 & 200 ? that might be interesting to see which gives best detail on our lake...
|
|
Re: Lowrance SONAR
[Re: Wyoboy]
#12885144
09/02/18 10:21 PM
|
Joined: Aug 2018
Posts: 267
Dwight Hardy
Angler
|
Angler
Joined: Aug 2018
Posts: 267 |
Thanks Dwight Hardy--can i set up a 4 split with any combination of frequencies i want? e.g. low chirp, high chirp, 83 & 200 ? that might be interesting to see which gives best detail on our lake... Not sure on that but I would think so. Someone who knows may answer. Best way to find out is try. Only takes a minute to find out. Let us know.
|
|
Re: Lowrance SONAR
[Re: jsplinter]
#12885675
09/03/18 03:39 PM
|
Joined: Aug 2018
Posts: 11
Wyoboy
Green Horn
|
Green Horn
Joined: Aug 2018
Posts: 11 |
Will do when i get the boat back tomorrow
|
|
Re: Lowrance SONAR
[Re: jsplinter]
#12887178
09/04/18 10:37 PM
|
Joined: Aug 2018
Posts: 11
Wyoboy
Green Horn
|
Green Horn
Joined: Aug 2018
Posts: 11 |
Haven't got the boat into the water yet so haven't been able to try a 4 split on sonar but i did call Lowrance tech support to ask if this could be done. If you can believe it they told me Gen 3 can't even do side by side sonar split with 2 different frequencies--notwithstanding the manual says you can--that was the level of competence of the tech rep i got -- she asked me which page in the manual said this--so i just thanked her and said adios as it was pretty clear i wasn't going to get a competent answer.
|
|
Re: Lowrance SONAR
[Re: jsplinter]
#12887661
09/05/18 01:03 PM
|
Joined: May 2014
Posts: 364
CoachPayne
Angler
|
Angler
Joined: May 2014
Posts: 364 |
I'm looking for someone that repairs Lowrance units or has a parts unit HDS 9 Gen 2. My pages button has crapped out and I need a part off of one to fix mine if any of you guys knows anyone I would appreciate it.
|
|
Re: Lowrance SONAR
[Re: jsplinter]
#12888255
09/05/18 10:12 PM
|
Joined: Mar 2009
Posts: 263
EDO
Angler
|
Angler
Joined: Mar 2009
Posts: 263 |
does the most current Lowrance 3D transducer have traditional 2D imaging? I get different answers every time I ask someone. Russell Marine has a you tube video that says it does not have traditional 2D imaging, but video is couple years old.
|
|
Re: Lowrance SONAR
[Re: EDO]
#12888647
09/06/18 10:22 AM
|
Joined: May 2009
Posts: 1,027
MAK747
Extreme Angler
|
Extreme Angler
Joined: May 2009
Posts: 1,027 |
does the most current Lowrance 3D transducer have traditional 2D imaging? I get different answers every time I ask someone. Russell Marine has a you tube video that says it does not have traditional 2D imaging, but video is couple years old. No the 3D transducer does not have traditional 2D sonar integrated. The only Lowrance transducer which has Downscan, Sidescan and 2D is the Totalscan transducer.
|
|
Re: Lowrance SONAR
[Re: jsplinter]
#12888792
09/06/18 01:25 PM
|
Joined: Aug 2018
Posts: 11
Wyoboy
Green Horn
|
Green Horn
Joined: Aug 2018
Posts: 11 |
ok--cannot simultaneously transmit any more than 2 sonar frequencies + the two structure scan frequencies--"Pages" will only allow you to drop in 2 sonar screens then it's not available any more--so no 4 split of all the sonar frequencies.
|
|
|