I have a 2005 Tracker Crappie Pro 175 and need to source the stainless countersunk self tapping screws that are used on the floors.

Has anyone been able to track down the exact screws that came in the boats?

Look for them at Fastenal....they likely will have something that would be an exact replacement or at least pretty similar.

I have, thanks for the suggestion though.

I�m curious if anyone has ever found a match online that was listed as a replacement part.

i did my 05 pro crappie last year, i'll look to see where i found those but no, i didn't find those fasteners or rivets at fastenal

Spanky, it would be awesome if you could let me know when you figure it out...it�s somewhat time sensitive, because my HOA will only allow me to have my boat in my driveway for two weeks...and I�m already at the one week mark.

Hahahaha.

i didn't keep the orig packaging, they were in a zip lock bag. the rivets i found at jay-cee sales at "rivetsinstock.com". i'm not sure if i found those (google search) "stainless steel self drilling deck screw" fasteners at gamut.com or denton tool and fastener. there were only 4 fasteners left in the bag or i would have offered them to you but i have plenty of the correct self sealing pop rivets

Google Stainless Town. That I where I found the fine thread allan screws I was needing

Yeah, not finding them in any of those suggested locations.

https://www.gamut.com/p/drilling-screw-400-series-stainless-steel-anti-corrosion-topcoat-OTcxNzQ=

they may be to long though?

Hey Spanky thanks for the link...guess I should have said �I haven�t found them in the proper size at any of those locations�.

I need 1-1/2� and 2�

And Grainger (gamut) only carries 1-7/16�

If its a self tapper 1 7/16 is real close to the same as a 1 1/2

Stainless is not a good steel to self tap with