Forums59
Topics1,039,277
Posts13,962,162
Members144,197
|
Most Online39,925 Dec 30th, 2023
|
|
Ultrex on Tracker PT175?
#12868417
08/18/18 02:33 PM
|
Joined: Aug 2011
Posts: 426
Noojen
OP
Angler
|
OP
Angler
Joined: Aug 2011
Posts: 426 |
I’m planning to upgrade from the original 12V Motorguide on my 2007 Tracker PT175 to a 24V, 80# Ultrex. Is anyone else running this setup on the PT175? Also, what gauge wires are you running to the Ultrex? I have 8 awg and was hoping to stick with that and upgrade the breaker to a 60A...
|
|
Re: Ultrex on Tracker PT175?
[Re: Noojen]
#12868431
08/18/18 02:44 PM
|
Joined: Mar 2015
Posts: 5,413
TCK73
TFF Celebrity
|
TFF Celebrity
Joined: Mar 2015
Posts: 5,413 |
On that 24V if you get over 13'-15' of wire length, you will want to go to a #6. The 60A Breaker is what you need.
|
|
Re: Ultrex on Tracker PT175?
[Re: Noojen]
#12868441
08/18/18 02:49 PM
|
Joined: Aug 2011
Posts: 426
Noojen
OP
Angler
|
OP
Angler
Joined: Aug 2011
Posts: 426 |
Anyone stuck with the stock 8 awg on the Ultrex? Issues?
|
|
Re: Ultrex on Tracker PT175?
[Re: Noojen]
#12868534
08/18/18 04:39 PM
|
Joined: Oct 2006
Posts: 13,522
Ken A.
Groovy
|
Groovy
Joined: Oct 2006
Posts: 13,522 |
Anyone stuck with the stock 8 awg on the Ultrex? Issues? . Be careful using wire that is not rated for the volt/amps you are gonna be pushing thru it. I had a fire break out on a boat many years ago because of an issue like this. Fire in a boat next to 20 gals of gas ain’t no fun.
|
|
Re: Ultrex on Tracker PT175?
[Re: Noojen]
#12868548
08/18/18 04:57 PM
|
Joined: Apr 2008
Posts: 41,003
CCTX
mapquest
|
mapquest
Joined: Apr 2008
Posts: 41,003 |
Jumper cable wire is usually 6 or 8 gauge
|
|
Re: Ultrex on Tracker PT175?
[Re: Noojen]
#12868681
08/18/18 08:21 PM
|
Joined: Mar 2012
Posts: 11,008
BigDozer66
TFF Guru
|
TFF Guru
Joined: Mar 2012
Posts: 11,008 |
2016 Ranger RT188 Charcoal Metallic Dual Console 2017 Yamaha 115 VMAX SHO (VF115LA) SS Prop Minn Kota Ultrex i-Pilot Link 45" 80 lb. Humminbird Helix 10 Mega SI BalZout Console Humminbird Helix 10 Mega SI BBT Bow Mount Trick Step
|
|
Re: Ultrex on Tracker PT175?
[Re: Noojen]
#12868690
08/18/18 08:41 PM
|
Joined: Jun 2006
Posts: 3,781
Outdoor Therapy
TFF Team Angler
|
TFF Team Angler
Joined: Jun 2006
Posts: 3,781 |
Run 6ga wire. It may be a PITA to do it, but do it once and do it the right way.
"Opportunity is missed by most people because it is dressed in overalls and looks like work.”- Thomas A Edison
|
|
Re: Ultrex on Tracker PT175?
[Re: Noojen]
#12868693
08/18/18 08:47 PM
|
Joined: Mar 2016
Posts: 542
TinRangerJim
Pro Angler
|
Pro Angler
Joined: Mar 2016
Posts: 542 |
Depending on the length of your run, you will be right on the ragged edge with #8 wire. I would go with #6 just to be safe. If you're worried about routing the new wire, just use the old to pull it. If you're worried about the cost, look at it this way: which is more expensive, a few feet of wire, or a new boat?
"Rip Some Lips" Nevadan by birth, Texan by choice Retired USAF, 1966-1989 Jim C.
|
|
Re: Ultrex on Tracker PT175?
[Re: TinRangerJim]
#12868787
08/18/18 11:03 PM
|
Joined: Aug 2011
Posts: 426
Noojen
OP
Angler
|
OP
Angler
Joined: Aug 2011
Posts: 426 |
Depending on the length of your run, you will be right on the ragged edge with #8 wire. I would go with #6 just to be safe. If you're worried about routing the new wire, just use the old to pull it. If you're worried about the cost, look at it this way: which is more expensive, a few feet of wire, or a new boat? Not worried about cost...more worried about how to route the wires without collateral damage of disconnecting something else in the process of pulling it thru the length of the boat. Also, I called and asked the techs at Bass Pro and Cabela’s and they’ve said they’ve installed the Ultrex on boats with 8 AWG wire with no issues so far...I don’t necessarily take their word as gospel, though...
|
|
Moderated by banker-always fishing, chickenman, Derek ðŸ, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|