|
Forums59
Topics1,059,317
Posts14,317,890
Members144,648
| |
Most Online39,925
Dec 30th, 2023
|
|
 Lowrance touch 12 gen 3 help
#12129552
03/07/17 07:53 PM
|
Joined: Mar 2014
Posts: 1,242
Insurance man
OP
Extreme Angler
|
|
OP
Extreme Angler
Joined: Mar 2014
Posts: 1,242 |
The new unit that came with my boat one day would not power on so I called Lowrance and they exchanged it for another one. The new one will not keep a good reading on the sonar down and if the boat is moving at all I loose the bottom. This is on a 2016 Skeeter FX 21 and the older unit showed the bottom up to about 60mph. Any idea what will fix this?
|
|
|
Re: Lowrance touch 12 gen 3 help
[Re: Insurance man]
#12130063
03/08/17 01:14 AM
|
Joined: Jan 2013
Posts: 92
CraZyNOTRT
Outdoorsman
|
|
Outdoorsman
Joined: Jan 2013
Posts: 92 |
check the transducer cable to make sure its plugged in all of the way and that there is no dirt inside the connection. check transducer for proper alignment and adjust. It does not take much to bump them on something and screw the alignment up. to align- https://www.youtube.com/watch?v=JuYsmJRc_fE
Last edited by CraZyNOTRT; 03/08/17 01:15 AM.
|
|
|
Re: Lowrance touch 12 gen 3 help
[Re: Insurance man]
#12130123
03/08/17 01:46 AM
|
Joined: Dec 2008
Posts: 18,016
grout-scout
TFF Guru
|
|
TFF Guru
Joined: Dec 2008
Posts: 18,016 |
Simple test to see if it's a transducer issue. Put some water into the bilge, not a lot needed; but you need enough to cover the transducer puck. If it now works then the transducer isn't installed properly. If it makes no difference then you have another issue.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
