how to remove old tranducers

how to remove old tranducers #11958496 11/30/16 04:08 PM
Joined: Oct 2016 Posts: 30 T Terry5357 OP Outdoorsman
OP Terry5357 Outdoorsman T Joined: Oct 2016 Posts: 30	There are 2 thru hull transducers in my boat that aren't being used. any suggestions on how to cut thru the epoxy that was used to mount them.

Re: how to remove old tranducers [Re: Terry5357] #11959096 11/30/16 10:39 PM
Joined: Feb 2010 Posts: 12,259 Lewisville Tx. shut-up-and-fish TFF Guru
shut-up-and-fish TFF Guru Joined: Feb 2010 Posts: 12,259 Lewisville Tx.	If you are not going to be installing another in-hull transducer then it's best to just leave them be. If you do not have the room to add one if you are wanting to then you will need to commence on chipping away with a hammer an flat head screw driver. www.shut-up-and-fish.com From Sales, Installation Services, and *On the water Education & Instructional Trips We have you covered here @ shut-up-and-fish for all of your Humminbird, Lowrance, Garmin, Minn Kota needs plus much much more - Call Now 972 822 9285

Re: how to remove old tranducers [Re: Terry5357] #11959120 11/30/16 11:01 PM
Joined: Dec 2006 Posts: 3,308 D Dayne TFF Team Angler
Dayne TFF Team Angler D Joined: Dec 2006 Posts: 3,308	I put a 2x4 against it and smack it with a hammer. It has never failed to knock them loose as the epoxy under them is very thin.

Hop To