|
Forums59
Topics1,056,326
Posts14,266,899
Members144,583
| |
Most Online39,925
Dec 30th, 2023
|
|
 Re: Humminbird SONAR
[Re: Ranger481]
#11893224
10/21/16 11:48 PM
|
Joined: Dec 2012
Posts: 6,710
44 Diesel
TFF Celebrity
|
|
TFF Celebrity
Joined: Dec 2012
Posts: 6,710 |
If I network a 998c SI with a Helix 12 CHIRP will the 998 be able to show the CHIRP image from the 12? No, it will share 2d but you will have to turn off Chirp. It will only share Chirp with another Chirp unit and currently Chirp is only available on the Helix 12s and Onix. The onix will only share waypoints with core units
Last edited by 44 Diesel; 10/21/16 11:51 PM.
|
|
|
Re: Humminbird SONAR
[Re: 44 Diesel]
#11893318
10/22/16 01:06 AM
|
Joined: Nov 2010
Posts: 5,154
Wayne P.
TFF Celebrity
|
|
TFF Celebrity
Joined: Nov 2010
Posts: 5,154 |
If I network a 998c SI with a Helix 12 CHIRP will the 998 be able to show the CHIRP image from the 12? No, it will share 2d but you will have to turn off Chirp. It will only share Chirp with another Chirp unit and currently Chirp is only available on the Helix 12s and Onix. The onix will only share waypoints with core units 
Helix 12 CHIRP MEGA SI+ GPS G4N, SOLIX 10 G3, Helix 15 CHIRP MEGA SI+ GPS G4N,
Helix 8 CHIRP MEGA SI+ GPS G4N, SOLIX 12 G3, MEGA 360, MEGA LIVE TL , MEGA LIVE 2, Xplore 10
|
|
|
Re: Humminbird SONAR
[Re: Wayne P.]
#11893372
10/22/16 01:51 AM
|
Joined: Oct 2016
Posts: 144
Ranger481
Outdoorsman
|
|
Outdoorsman
Joined: Oct 2016
Posts: 144 |
Thanks for the info gentlemen. Much appreciated. If I move my 998c SI to the bow what transducer should I put on the trolling motor? Thanks again.
|
|
|
Re: Humminbird SONAR
[Re: jsplinter]
#11893471
10/22/16 02:40 AM
|
Joined: Dec 2012
Posts: 6,710
44 Diesel
TFF Celebrity
|
|
TFF Celebrity
Joined: Dec 2012
Posts: 6,710 |
The same one that came with the 998, might want to use a transducer and shield saver trolling motor mount
|
|
|
Re: Humminbird SONAR
[Re: jsplinter]
#11894698
10/23/16 12:04 AM
|
Joined: Aug 2011
Posts: 2,957
Bob Landry
Extreme Angler
|
|
Extreme Angler
Joined: Aug 2011
Posts: 2,957 |
They make a short version of that transducer mount that works very well on the TM.
2015 Seaark 1872 MV CC Etec-90
Two Helix 12 CHIRP SI's, , MinnKota Riptide ST80/i-pilot Link, Bob's Hydraulic
2020 Robalo R200 CC, Yamaha 150
Bitter Gun Owner
Bitter Clinger
Armed Infidel
|
|
|
Re: Humminbird SONAR
[Re: jsplinter]
#11929601
11/12/16 01:02 AM
|
Joined: Sep 2006
Posts: 12,622
JIM SR.
TFF Guru
|
|
TFF Guru
Joined: Sep 2006
Posts: 12,622 |
Just replaced a HB688 combo with a new HB Helix7 with GPS/SI/DI, installed by a
reputable boat dealer shop. The Helex GPS is stellar, sonar is great, the SI and DI are terrible.
DI has a very weak return, looks like I'm getting about 50%, the SI is worse, wavery and unviewable.
The 688 was good, only relaced it to go bigger and better. The transducer sets next to my Garmin93SV as did my
other. The Garmin still works great. Any help with the Helix...???
|
|
|
Re: Humminbird SONAR
[Re: jsplinter]
#11929635
11/12/16 01:29 AM
|
Joined: Dec 2012
Posts: 6,710
44 Diesel
TFF Celebrity
|
|
TFF Celebrity
Joined: Dec 2012
Posts: 6,710 |
can you post a pic of the transducer install?
|
|
|
Re: Humminbird SONAR
[Re: jsplinter]
#11929686
11/12/16 01:55 AM
|
Joined: Sep 2006
Posts: 12,622
JIM SR.
TFF Guru
|
|
TFF Guru
Joined: Sep 2006
Posts: 12,622 |
tomorrow, with graph pics too,..Thanks 44D
|
|
|
Re: Humminbird SONAR
[Re: 44 Diesel]
#11929719
11/12/16 02:18 AM
|
Joined: Oct 2016
Posts: 144
Ranger481
Outdoorsman
|
|
Outdoorsman
Joined: Oct 2016
Posts: 144 |
Last weekend as I was removing my 998 si transducer I found unbenonced to me that I had a y cable going to a 2d through hull transducer. Finally got to run my Helix 12 today. When I get on plane I lose sonar as well as SI. I knew I would loose SI but didn't expect to lose sonar. Can I y to the 2d sonar transducer though the hull and if so how will this effect the CHIRP?
|
|
|
Re: Humminbird SONAR
[Re: jsplinter]
#11929809
11/12/16 03:26 AM
|
Joined: Dec 2012
Posts: 6,710
44 Diesel
TFF Celebrity
|
|
TFF Celebrity
Joined: Dec 2012
Posts: 6,710 |
yes you can, that is probably the best setup for your boat, it will have no effect on chirp. The unit chirps the transducer through the processor so you will still have chirp . The y cable will separate the signals from the transducers due to the way the y cable is pinned out.
|
|
|
Re: Humminbird SONAR
[Re: jsplinter]
#11930895
11/13/16 01:18 AM
|
Joined: Oct 2016
Posts: 144
Ranger481
Outdoorsman
|
|
Outdoorsman
Joined: Oct 2016
Posts: 144 |
For my Helix 12 should I get a autochart no line card or will a regular SIM card be as good? Thanks in advance.
|
|
|
Re: Humminbird SONAR
[Re: jsplinter]
#11930969
11/13/16 02:07 AM
|
Joined: Dec 2012
Posts: 6,710
44 Diesel
TFF Celebrity
|
|
TFF Celebrity
Joined: Dec 2012
Posts: 6,710 |
|
|
|
Re: Humminbird SONAR
[Re: jsplinter]
#11932108
11/13/16 11:02 PM
|
Joined: Nov 2004
Posts: 696
ScottCook
Pro Angler
|
|
Pro Angler
Joined: Nov 2004
Posts: 696 |
Helix 10 software update instructions discrepancy.
The Helix 9 and Helix 10 Operations guide, page 155. Step 3 says to "Install the SD card with the updated software file into the control head slot."
Step 4 says to "Power on: The control head will recognize the new software..."
In contrast to this, the MyHumminbird website update directions, step 5, says "POWER ON YOUR UNIT, allow the unit to go through the complete start up BEFORE pressing any buttons or selecting any menu options. After the unit has completed the loading process and you have clicked through the warnings and information, place the SD card in the unit."
So which is it? SD card then power up, or power up then insert the SD card?
Last edited by ScottCook; 11/13/16 11:02 PM.
|
|
|
Re: Humminbird SONAR
[Re: ScottCook]
#11932127
11/13/16 11:10 PM
|
Joined: Nov 2010
Posts: 5,154
Wayne P.
TFF Celebrity
|
|
TFF Celebrity
Joined: Nov 2010
Posts: 5,154 |
Helix 10 software update instructions discrepancy.
The Helix 9 and Helix 10 Operations guide, page 155. Step 3 says to "Install the SD card with the updated software file into the control head slot."
Step 4 says to "Power on: The control head will recognize the new software..."
In contrast to this, the MyHumminbird website update directions, step 5, says "POWER ON YOUR UNIT, allow the unit to go through the complete start up BEFORE pressing any buttons or selecting any menu options. After the unit has completed the loading process and you have clicked through the warnings and information, place the SD card in the unit."
So which is it? SD card then power up, or power up then insert the SD card? FULLY start the unit up in Normal or Simulator, THEN put the memory card in the unit to load the update. If you do it the other way, the unit will ignore the memory card.
Helix 12 CHIRP MEGA SI+ GPS G4N, SOLIX 10 G3, Helix 15 CHIRP MEGA SI+ GPS G4N,
Helix 8 CHIRP MEGA SI+ GPS G4N, SOLIX 12 G3, MEGA 360, MEGA LIVE TL , MEGA LIVE 2, Xplore 10
|
|
|
Re: Humminbird SONAR
[Re: jsplinter]
#11936381
11/16/16 03:32 AM
|
Joined: Feb 2010
Posts: 12,254
shut-up-and-fish
TFF Guru
|
|
TFF Guru
Joined: Feb 2010
Posts: 12,254 |
MEGA IMAGING BRING FISHING INTO FOCUS Look closely. You've never seen anything like new MEGA Imaging, Delivering nearly 3X the output of standard Side Imaging®, this groundbreaking technology takes fishfinding into the megahertz frequency for the very first time. It's indisputably the clearest, sharpest sonar image ever-brought to you by the undisputed leader. http://www.humminbird.com/Category/Technology/MEGA-Imaging/#id_AutoChartLive The Leader Keeps Leading.....
![[Linked Image]](https://farm5.staticflickr.com/4214/35243190830_389843bb65_n.jpg) www.shut-up-and-fish.comFrom *Sales, *Installation Services, and *On the water Education & Instructional Trips We have you covered here @ shut-up-and-fish for all of your Humminbird, Lowrance, Garmin, Minn Kota needs plus much much more - Call Now 972 822 9285
|
|
|
