|
Forums59
Topics1,057,630
Posts14,287,826
Members144,611
| |
Most Online39,925
Dec 30th, 2023
|
|
 1983 80 Merc not dying with key!
#11662898
06/12/16 11:50 PM
|
Joined: Sep 2011
Posts: 178
Shawn the printer
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Sep 2011
Posts: 178 |
I've got the blk/yel wire off the switch box and it runs fine. If I touch the wire back to the switch box it will kill it. I'm just trying to make sure the box is bad before I replace it. Anyone have any ideas? Thanks in advance!
|
|
|
Re: 1983 80 Merc not dying with key!
[Re: Shawn the printer]
#11663171
06/13/16 02:16 AM
|
Joined: Jul 2005
Posts: 1,887
lakeman
Extreme Angler
|
|
Extreme Angler
Joined: Jul 2005
Posts: 1,887 |
Sounds like that wire may be shorted to ground some where,Unless it is your ground wire, if it is then sounds maybe a bad switch,
|
|
|
Re: 1983 80 Merc not dying with key!
[Re: lakeman]
#11663264
06/13/16 03:03 AM
|
Joined: Jul 2010
Posts: 1,153
Fisher77
Extreme Angler
|
|
Extreme Angler
Joined: Jul 2010
Posts: 1,153 |
Sounds like that wire may be shorted to ground some where,Unless it is your ground wire, if it is then sounds maybe a bad switch,
Agreed. Need to check the ignition switch, and the wiring. What position is the key in when you touch the blk/yel wire to kill it?
�You may all go to hell and I will go to Texas.�....Davy Crockett "Victory or Death"....William Barrett Travis 
|
|
|
Re: 1983 80 Merc not dying with key!
[Re: Fisher77]
#11664058
06/13/16 04:16 PM
|
Joined: Sep 2011
Posts: 178
Shawn the printer
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Sep 2011
Posts: 178 |
The key is in the run position. I will take another look at the harness and key switch. Thanks guys!
|
|
|
Re: 1983 80 Merc not dying with key!
[Re: Shawn the printer]
#11664655
06/13/16 07:45 PM
|
Joined: Feb 2006
Posts: 4,040
bronco71
TFF Team Angler
|
|
TFF Team Angler
Joined: Feb 2006
Posts: 4,040 |
when it is running with the wire off does the kill switch work? If it doesn't it may have something to do with the kill switch wiring.
1987 Nitro MX185/Mercury Black Max 150 (needs lots of work, put motor on nephew's boat)
1994 XSC-2200 "Jaguar" AKA Shadow 22 Magnum (restoring w/Mercury 200 XRI)
1994 Pantera II (restoring w/Mercury 200 EFI)
1999 Triton TX21/225 Mercury Optimax
|
|
|
Re: 1983 80 Merc not dying with key!
[Re: Shawn the printer]
#11664770
06/13/16 08:33 PM
|
Joined: Jul 2010
Posts: 1,153
Fisher77
Extreme Angler
|
|
Extreme Angler
Joined: Jul 2010
Posts: 1,153 |
Does it start with the blk/yel hooked up?
The blk/yel wire should provide ground to the switch box when the key switch is turned to the off position to kill the engine. If it will not start with the blk/yel hooked up, either the key switch is bad, the safety switch is bad, or the blk/yel is shorted to ground somewhere. One other thing it could be is the tilt mercury switch. The mercury switch should be on the side of the engine block, if yours still has it.
�You may all go to hell and I will go to Texas.�....Davy Crockett "Victory or Death"....William Barrett Travis
|
|
|
Re: 1983 80 Merc not dying with key!
[Re: Fisher77]
#11665655
06/14/16 02:45 AM
|
Joined: Sep 2011
Posts: 178
Shawn the printer
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Sep 2011
Posts: 178 |
The yel/blk wire is spliced into the harness with one going to a terminal block and the other going to the switchbox. The tilt switch has been removed as far as I can tell. CDI troubleshooting points to the box being bad. I ran fine and just quit one day.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
