interested 2x4 with 6" hole to build a game/fish processing table

Sorry guys I really kinda blindsided myself with this one. I was expecting a couple of folks interested but have over 2 dozen responses in my PM's and direct emails from my website. I will not be able to get some real photos up until probably Tuesday afternoon. I thought I was headed back to Texoma where I have some of my own boards but the weather and last weeks hail damage changed my plans. I didn't know we had penetrations of the roof until this morning's rain.

These are my cad models that I cut from regularly just for reference. Since I look to my customers to tell me specifically what they need for a particular truck, I seldom have detailed dimensions from different years and models of trucks.

I can add or change blood lines or add a pocket or two for holding things at no extra charge for TFF members right now.

In the near future, They can be provided with drawer slide on the back that allow them to slide partially or completely off the tailgate.

I have two jobs being quoted right now for custom curved boards that match a section of a gunnel and are extended inboard a few inches with slots cut for rod holders. The bottom 2 pics are rod holders I use on my kayaks but are made from black ABS (like a car bumper). I will cut similar slots in the gunnel cutting boards to hold rods.

The 20x48, 20x60 and 24x48 are the most popular I make. The sizes are nominal and will come in just a fraction of an inch smaller. If you custom order one, it will be exactly as you specify.
Stock sizes:
20x48 $60
24x48 $70
20x60 $85
Custom cuts need to be quoted individually

I have couple of folks in direct contact with me requesting shipping costs etc. I will not be able to address this until mid week while I find appropriate packaging etc.

Just let me know where you want the hole and it will be the same price as the stock 2x4. Small mods like this don't really cost me a lot of time or trouble.

Thanks, Phill

I love a large cutting board. I have 18" x 36" and it sure is handy. a 4 footer would be handy for large stripers etc.

I have a 3' x 1.5' piece of counter top that was cut off during a new home installation. I keep it in the back of my truck and it works great. Can't get any cheaper than free!

FYI..

Do not leave at car wash for even a second.

Yep. I had one. HAD!!

What's the thickness?

1/2" typically. But I can get any thickness. The price is relative to the thickness. Most of the price is in material cost.

Impressive material, Mr. Pittman!

Very nice Carver! Simple and efficient........always the best!

Here are the TFF prices and they can change as quickly as the price of oil.


The 20x48, 20x60 and 24x48 are the most popular I make. The sizes are nominal and will come in just a fraction of an inch smaller. If you custom order one, it will be exactly as you specify.
Stock sizes in 1/2" material:
20x48 $60
24x48 $70
20x60 $85
Custom cuts need to be quoted individually, but most will fall in this same general price range unless they are unusually shaped and do not fit on the sheets with other stock products.

Packaging if I need to ship will be $6.50 That is my actual cost of a box that fits and bubble wrap. I may find another source with better pricing, but his is the best I can do right now.
Shipping cost will be determined by weight and location for each order, but I pass it through at actual cost.

I will be adding some 5/16 holes on the perimeter to drop a pin or bolt through to keep the part from sliding around if you do not mount it. I am sure these will evolve further with input from users so do not hesitate to ask for improvement or new features.

I can take most plastic, Paypal and always cash. but do not have it set up on my website yet.