|
Forums59
Topics1,058,051
Posts14,295,421
Members144,616
| |
Most Online39,925
Dec 30th, 2023
|
|
 Water Temp from Structure Transducer (HDS 7 Touch Gen2)
#11529526
04/08/16 05:11 PM
|
Joined: Nov 2008
Posts: 1,560
BassHunter 69
OP
Extreme Angler
|
|
OP
Extreme Angler
Joined: Nov 2008
Posts: 1,560 |
After much searching and trial and error. I have finally found the solution for my HDS 7 Touch reading water temp from the epoxied transducer in the bottom of the boat.
Change your 83/200k sonar transducer source to one that doesn't have Temp. for those freqs. put in PD-WBL
This will force unit to get the water temp from the outboard structure transducer.
Field Staff for Wicked Weights (Tungsten Done Right!)
|
|
 Re: Water Temp from Structure Transducer (HDS 7 Touch Gen2)
[Re: BassHunter 69]
#11529531
04/08/16 05:13 PM
|
Joined: Nov 2008
Posts: 1,560
BassHunter 69
OP
Extreme Angler
|
|
OP
Extreme Angler
Joined: Nov 2008
Posts: 1,560 |
PS.... I have found you can also pull the pin #4 ( Temp Lead) from the transducer plug but the setting above doesn't damage the connector.
Field Staff for Wicked Weights (Tungsten Done Right!)
|
|
|
Re: Water Temp from Structure Transducer (HDS 7 Touch Gen2)
[Re: BassHunter 69]
#11529705
04/08/16 06:45 PM
|
Joined: May 2009
Posts: 1,040
MAK747
Extreme Angler
|
|
Extreme Angler
Joined: May 2009
Posts: 1,040 |
After much searching and trial and error. I have finally found the solution for my HDS 7 Touch reading water temp from the epoxied transducer in the bottom of the boat.
Change your 83/200k sonar transducer source to one that doesn't have Temp. for those freqs. put in PD-WBL
This will force unit to get the water temp from the outboard structure transducer. BassHunter, Have you confirmed that this solution works? Others have mentioned trying this without much success. What software version is your touch unit currently running?
|
|
|
Re: Water Temp from Structure Transducer (HDS 7 Touch Gen2)
[Re: MAK747]
#11530701
04/09/16 03:47 AM
|
Joined: Nov 2008
Posts: 1,560
BassHunter 69
OP
Extreme Angler
|
|
OP
Extreme Angler
Joined: Nov 2008
Posts: 1,560 |
 I have confirmed that it was wrong. I have removed pin 4 and it does work.
Field Staff for Wicked Weights (Tungsten Done Right!)
|
|
|
Re: Water Temp from Structure Transducer (HDS 7 Touch Gen2)
[Re: BassHunter 69]
#11530710
04/09/16 03:52 AM
|
Joined: Nov 2008
Posts: 1,560
BassHunter 69
OP
Extreme Angler
|
|
OP
Extreme Angler
Joined: Nov 2008
Posts: 1,560 |
Field Staff for Wicked Weights (Tungsten Done Right!)
|
|
|
Re: Water Temp from Structure Transducer (HDS 7 Touch Gen2)
[Re: BassHunter 69]
#11530716
04/09/16 04:00 AM
|
Joined: May 2009
Posts: 1,040
MAK747
Extreme Angler
|
|
Extreme Angler
Joined: May 2009
Posts: 1,040 |
Thanks for the reply. It would have been nice if the configuration solution would have worked but at least the pin removal is a known good workaround.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
