|
Forums59
Topics1,057,885
Posts14,292,641
Members144,616
| |
Most Online39,925
Dec 30th, 2023
|
|
 Graphs and map card
#11371262
01/26/16 03:54 PM
|
Joined: Jan 2004
Posts: 16,992
ezbassin
OP
TFF Guru
|
|
OP
TFF Guru
Joined: Jan 2004
Posts: 16,992 |
I have a Lowrance touch 12 on the console with a map card in it and it is linked to a Lowrance touch 9 up front with an Ethernet cable. The front graph seems to loose the map signal often and keeps reloading charts. I did not have a spare Ethernet cable to see if that was the problem. What do you think?
Maybe I should switch the map card to the front and see what happens.
Last edited by ezbassin; 01/26/16 03:56 PM.
|
|
|
Re: Graphs and map card
[Re: ezbassin]
#11371298
01/26/16 04:14 PM
|
Joined: Jun 2015
Posts: 547
WillieKetchum
Pro Angler
|
|
Pro Angler
Joined: Jun 2015
Posts: 547 |
That is the only thing I can think of that would make it act like that is the ethernet cable. BUT, if it's your ethernet cable, your side and down image should be having issues, too.
|
|
|
Re: Graphs and map card
[Re: ezbassin]
#11371413
01/26/16 05:06 PM
|
Joined: Oct 2013
Posts: 130
Brian_Martin
Outdoorsman
|
|
Outdoorsman
Joined: Oct 2013
Posts: 130 |
share a way point at the 12 and see if it pops up on the 9. if it shares the waypoint the ether net cable is fine.
Martin Guide Service & Lowrance Electronics Education Toledo Bend and Sam Rayburn 936-635-1374 or 936-676-8394
|
|
|
Re: Graphs and map card
[Re: ezbassin]
#11371873
01/26/16 08:31 PM
|
Joined: Jun 2005
Posts: 1,016
jfdawson
Extreme Angler
|
|
Extreme Angler
Joined: Jun 2005
Posts: 1,016 |
i just experienced the same issue your describing. After buying a new Ethernet Cable, I determined that my issue was the Navionics card. I called Navionics, explained my troubleshooting steps, etc.. Navionics sent me a brand new Platinum South Card and it solved the problem. One thing I would suggest is make sure the units work fine with Insight pre-loaded maps and you're seeing Waypoints on both units, etc.. If that's working like it should, then it points to a Corrupt Navionics card. here's my post on BBC on this subject: http://www.bbcboards.net/showthread.php?t=674767good luck and hope that helps you. Jeff
|
|
|
Re: Graphs and map card
[Re: WillieKetchum]
#11372255
01/26/16 11:45 PM
|
Joined: Jan 2004
Posts: 16,992
ezbassin
OP
TFF Guru
|
|
OP
TFF Guru
Joined: Jan 2004
Posts: 16,992 |
That is the only thing I can think of that would make it act like that is the ethernet cable. BUT, if it's your ethernet cable, your side and down image should be having issues, too. I have a HDI transducer hooked to the front unit so down image is not affected by the Ethernet cable.
|
|
|
Re: Graphs and map card
[Re: Brian_Martin]
#11372257
01/26/16 11:45 PM
|
Joined: Jan 2004
Posts: 16,992
ezbassin
OP
TFF Guru
|
|
OP
TFF Guru
Joined: Jan 2004
Posts: 16,992 |
share a way point at the 12 and see if it pops up on the 9. if it shares the waypoint the ether net cable is fine. It does. It just keeps rebooting the charts.
|
|
|
Re: Graphs and map card
[Re: ezbassin]
#11372260
01/26/16 11:47 PM
|
Joined: Jan 2004
Posts: 16,992
ezbassin
OP
TFF Guru
|
|
OP
TFF Guru
Joined: Jan 2004
Posts: 16,992 |
It was doing it with the Navionics card and it is doing it with the Legend card as well.
|
|
|
Re: Graphs and map card
[Re: ezbassin]
#11375560
01/28/16 03:42 AM
|
Joined: Oct 2013
Posts: 130
Brian_Martin
Outdoorsman
|
|
Outdoorsman
Joined: Oct 2013
Posts: 130 |
try a soft reset. back up all data before hand just in case. if that doesnt work try the hard reset.
Martin Guide Service & Lowrance Electronics Education Toledo Bend and Sam Rayburn 936-635-1374 or 936-676-8394
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
