Forums59
Topics1,039,469
Posts13,965,196
Members144,207
|
Most Online39,925 Dec 30th, 2023
|
|
help on 98 150 faststrike.....gary...hopalong
#10233505
08/24/14 02:25 AM
|
Joined: Dec 2012
Posts: 93
DEADSTICKER
OP
Outdoorsman
|
OP
Outdoorsman
Joined: Dec 2012
Posts: 93 |
hey hopalong or gary Purdy....what should compression be on my 98 150 faststrike ? seems like it may be down on power slightly and I think I here a little piston slap at high rpm. thanx for help. if I need powerhead who would you suggest ? I live at cedar creel lake
|
|
Re: help on 98 150 faststrike.....gary...hopalong
[Re: DEADSTICKER]
#10233939
08/24/14 01:01 PM
|
Joined: May 2003
Posts: 11,586
gary purdy
TFF Guru
|
TFF Guru
Joined: May 2003
Posts: 11,586 |
A compression test is relevant to how the test was accomplished. Was the motor warmed up first ?, was control at full throttle ?, the type and quality of compression gauge will cause different results. On this motor I would want 100psi and all cylinders within 10psi. It is very possible you have bought some fuel causing the detonation or you have carbon build-up. I would guess your hearing the reeds. Total timing needs to be checked periodically on all motors. I purposely set the timing 2 degrees slower than factory settings because of our fuel nowdays.
The world will not be destroyed by those who do evil, but by those who watch them without doing anything. Remember what He has done and remember that He is not done yet!-- GOD IS GOOD
|
|
Re: help on 98 150 faststrike.....gary...hopalong
[Re: gary purdy]
#10234055
08/24/14 02:26 PM
|
Joined: Dec 2012
Posts: 93
DEADSTICKER
OP
Outdoorsman
|
OP
Outdoorsman
Joined: Dec 2012
Posts: 93 |
thanx gary....I have a quality gauge and will run the test with warm engine and full throttle. do you work at your home or at a dealer. would like you to look this motor over and service cooling system
|
|
Re: help on 98 150 faststrike.....gary...hopalong
[Re: DEADSTICKER]
#10234133
08/24/14 03:17 PM
|
Joined: Sep 2008
Posts: 121,172
hopalong
Pescador Loco
|
Pescador Loco
Joined: Sep 2008
Posts: 121,172 |
|
|
Re: help on 98 150 faststrike.....gary...hopalong
[Re: DEADSTICKER]
#10234311
08/24/14 05:18 PM
|
Joined: May 2003
Posts: 11,586
gary purdy
TFF Guru
|
TFF Guru
Joined: May 2003
Posts: 11,586 |
You are close to Cedar Creek Lake and I am close to Lake Alan Henry. I think your too far away pard.
The world will not be destroyed by those who do evil, but by those who watch them without doing anything. Remember what He has done and remember that He is not done yet!-- GOD IS GOOD
|
|
Re: help on 98 150 faststrike.....gary...hopalong
[Re: DEADSTICKER]
#10234330
08/24/14 05:30 PM
|
Joined: Nov 2012
Posts: 11,579
txmasterpo
TFF Guru
|
TFF Guru
Joined: Nov 2012
Posts: 11,579 |
Texas Outboards in Tool is right there and as good as you'll find around there.....4 year warranty available
|
|
Re: help on 98 150 faststrike.....gary...hopalong
[Re: DEADSTICKER]
#10234369
08/24/14 05:53 PM
|
Joined: Sep 2008
Posts: 121,172
hopalong
Pescador Loco
|
Pescador Loco
Joined: Sep 2008
Posts: 121,172 |
If you go with a rebuild talk to monty racing first. They only do johnnierudes and they do them well (mo ty did the sork on mine, 175 fast strike 215hp at prop on dyno)
|
|
Re: help on 98 150 faststrike.....gary...hopalong
[Re: DEADSTICKER]
#10234650
08/24/14 08:33 PM
|
Joined: Dec 2012
Posts: 93
DEADSTICKER
OP
Outdoorsman
|
OP
Outdoorsman
Joined: Dec 2012
Posts: 93 |
thanx guys.......anyone know of a good 175 faststrike for sale ?
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|