texasfishingforum.com logo
Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
BX19gti, Likesfishing, db89, OlePhart11, Rick P
119199 Registered Users
Top Posters(All Time)
TexDawg 119,880
Bigbob_FTW 95,524
John175☮ 85,945
Pilothawk 83,279
Bob Davis 82,755
Mark Perry 72,532
Derek 🐝 68,324
JDavis7873 67,416
Forum Statistics
Forums59
Topics1,039,312
Posts13,962,704
Members144,199
Most Online39,925
Dec 30th, 2023
Print Thread
Graphs and map card #11371262 01/26/16 03:54 PM
Joined: Jan 2004
Posts: 16,868
E
ezbassin Online Content OP
TFF Guru
OP Online Content
TFF Guru
E
Joined: Jan 2004
Posts: 16,868
I have a Lowrance touch 12 on the console with a map card in it and it is linked to a Lowrance touch 9 up front with an Ethernet cable. The front graph seems to loose the map signal often and keeps reloading charts. I did not have a spare Ethernet cable to see if that was the problem. What do you think?

Maybe I should switch the map card to the front and see what happens.

Last edited by ezbassin; 01/26/16 03:56 PM.
Moritz Chevrolet - 9101 Camp Bowie W Blvd, Fort Worth, TX - Monte Coon (817) 696-2003
Re: Graphs and map card [Re: ezbassin] #11371298 01/26/16 04:14 PM
Joined: Jun 2015
Posts: 547
W
WillieKetchum Offline
Pro Angler
Offline
Pro Angler
W
Joined: Jun 2015
Posts: 547
That is the only thing I can think of that would make it act like that is the ethernet cable. BUT, if it's your ethernet cable, your side and down image should be having issues, too.

Re: Graphs and map card [Re: ezbassin] #11371413 01/26/16 05:06 PM
Joined: Oct 2013
Posts: 130
Brian_Martin Offline
Outdoorsman
Offline
Outdoorsman
Joined: Oct 2013
Posts: 130
share a way point at the 12 and see if it pops up on the 9. if it shares the waypoint the ether net cable is fine.


Martin Guide Service & Lowrance Electronics Education Toledo Bend and Sam Rayburn 936-635-1374 or 936-676-8394
Re: Graphs and map card [Re: ezbassin] #11371873 01/26/16 08:31 PM
Joined: Jun 2005
Posts: 1,014
J
jfdawson Offline
Extreme Angler
Offline
Extreme Angler
J
Joined: Jun 2005
Posts: 1,014
i just experienced the same issue your describing. After buying a new Ethernet Cable, I determined that my issue was the Navionics card. I called Navionics, explained my troubleshooting steps, etc.. Navionics sent me a brand new Platinum South Card and it solved the problem.

One thing I would suggest is make sure the units work fine with Insight pre-loaded maps and you're seeing Waypoints on both units, etc.. If that's working like it should, then it points to a Corrupt Navionics card.

here's my post on BBC on this subject:
http://www.bbcboards.net/showthread.php?t=674767


good luck and hope that helps you.

Jeff

Re: Graphs and map card [Re: WillieKetchum] #11372255 01/26/16 11:45 PM
Joined: Jan 2004
Posts: 16,868
E
ezbassin Online Content OP
TFF Guru
OP Online Content
TFF Guru
E
Joined: Jan 2004
Posts: 16,868
Originally Posted By: WillieKetchum
That is the only thing I can think of that would make it act like that is the ethernet cable. BUT, if it's your ethernet cable, your side and down image should be having issues, too.


I have a HDI transducer hooked to the front unit so down image is not affected by the Ethernet cable.

Re: Graphs and map card [Re: Brian_Martin] #11372257 01/26/16 11:45 PM
Joined: Jan 2004
Posts: 16,868
E
ezbassin Online Content OP
TFF Guru
OP Online Content
TFF Guru
E
Joined: Jan 2004
Posts: 16,868
Originally Posted By: Brian_Martin
share a way point at the 12 and see if it pops up on the 9. if it shares the waypoint the ether net cable is fine.


It does. It just keeps rebooting the charts.

Re: Graphs and map card [Re: ezbassin] #11372260 01/26/16 11:47 PM
Joined: Jan 2004
Posts: 16,868
E
ezbassin Online Content OP
TFF Guru
OP Online Content
TFF Guru
E
Joined: Jan 2004
Posts: 16,868
It was doing it with the Navionics card and it is doing it with the Legend card as well.

Re: Graphs and map card [Re: ezbassin] #11375560 01/28/16 03:42 AM
Joined: Oct 2013
Posts: 130
Brian_Martin Offline
Outdoorsman
Offline
Outdoorsman
Joined: Oct 2013
Posts: 130
try a soft reset. back up all data before hand just in case. if that doesnt work try the hard reset.


Martin Guide Service & Lowrance Electronics Education Toledo Bend and Sam Rayburn 936-635-1374 or 936-676-8394
Previous Thread
Index
Next Thread

© 1998-2022 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide
Powered by UBB.threads™ PHP Forum Software 7.7.3