Recedntly purchased a 17 foot Bass Tracker, S/N BUJ21117J596 with a 90 HP Mercury.Need to replace the cast aluminum triangular shaped nose piece that is atttached via rivets to the hull as well as the left corner bracket at the transom. Both where loose and during a rough ride in on Ft Phantom fell off. I'm sure I can fabricate or have them fabricated but would prefer tp purchase originals if possible to get back on the water as soon as possible. Crappie are on here. Contacted Bass Tracker and they do not stock as boat is a 1996 model and had no leads. Any helpor suggestions will be apreciated. Thanks